Abstract
A new method of assessing the impact–abrasive resistance of steel permits simulation of the impact–abrasive wear with variation in the magnitude and inclination of the impact force, type of abrasive, and its grain size and rate of consumption. The influence of five carbide-forming elements on the properties of the cast and quenched steel is studied: specifically, attention focuses on the abrasion resistance, impact–abrasive resistance, and hardness of the steel. Optimal steel compositions with abrasion resistance and impact–abrasive resistance greater than that of 35GL steel are identified.
Similar content being viewed by others
REFERENCES
Styrikovich, M.I., Prospects of energetic industry, Nauka Zhizn’, 1984, no. 3, p. 74.
Petrica, M., Peinsitt, T., and Badisch, E., Characterization of impact abrasive wear produced by different rocks, Key Eng. Mater., 2014, vol. 604, pp. 47–50.
Spero, C., Survey on wear in coal pulverizing mills, Part 2: Effect of grinding element material properties, Met. Forum, 1992, vol. 16, no. 3, pp. 225–236.
Arnold, B.K., Heijkoop, T., Lloyd, P.G., et al., Wear of cast-bonded components in a coal pulvesier mill, Wear, 1997, vol. 203, pp. 663–670.
Gulyaev, B.B. and Gladyshev, S.A., Optimization of cold-resistance composition of high-strength steel using mathematical planning, Liteinoe Proizvod., 1985, no. 10, pp. 136–140.
Voinov, B.A., Iznosostoikie splavy i pokrytiya (Wear-Resistant Alloys and Coatings), Moscow: Mashinostroenie, 1980.
Tęcza, G. and Zapala, R., Changes in impact strength and abrasive wear resistance of cast high manganese steel due to the formation of primary titanium carbides, Arch. Foundry Eng., 2018, vol. 18, no. 1, pp. 119–122.
Wieczorek, A.N. Operation-oriented studies on wear properties of surface-hardened alloy cast steels used in mining in the conditions of the combined action of dynamic forces and an abrasive material, Arch. Metall. Mater., 2017, vol. 62, no. 4, pp. 2381–2389.
Tian, H., Liu, Y., Zhang, P., at el., Research and development of alloyed austenite medium manganese steel and its impact abrasive wear resistance, Heat Treat. Met., 2013, vol. 38, no. 2, pp. 30–34.
Khrushchev, M.M. and Babichev, M.A., Iznosostoikost’ i struktura tverdykh naplavok (Wear-Resistance and Structure of Solid Surfacing), Moscow: Mashinostroenie, 1971.
Komarov, O.S., Ivashkin, V.V., and Urbanovich, N.I., Mechanism of surface-layer hardening in impact-abrasive wear of high-chromium cast-iron, Met. Sci. Heat Treat., 1990, vol. 32, nos. 3–4, pp. 278–280.
Deng, X.T., Fu, T.L., Wang, Z.D., at el., Epsilon carbide precipitation and wear behavior of low alloy wear resistant steels, Mater. Sci. Technol., 2016, vol. 32, no. 4, pp. 320–327.
Atabaki, M.M., Jafari, S., and Abdollah-pour, H., Abrasive wear behavior of high chromium cast iron and Hadfield steel—a comparison, J. Iron Steel Res. Int., 2012, vol. 19, no. 4, pp. 43–50.
Mulyavko, N.M., Vdovin, K.N., and Sinitskii, E.V., Abrazivnaya iznosostoikost’ litykh metallov i splavov (Abrasive Wear-Resistance of Casted Metals and Alloys), Kolokol’tsev, V.M., Ed., Magnitogorsk: Magnitogorsk. Gorno-Metall. Inst. im. G.I. Nosova, 2004.
Khrushchev, M.M., Laboratornye metody ispytaniya na iznashivanie materialov trubchatykh koles (Laboratory Testing for Material Wear of Tubular Wheels), Moscow: Mashinostroenie, 1966.
Zhang, D., Beeley, P.R., and Baker, A.J., The design of an impact abrasion testing machine, Wear, 1994, vol. 173, nos. 1–2, pp. 59–64.
Bratkovskii, E.V. and Kharitonov, F.N., Improvement of wear-resistance of casted steels, in Sbornik Nauchnykh Trudov—Magnitogorskii Gorno-Metallurgicheskii Institut imeni G.I. Nosova (Collection of Scientific Works of the Magnitogorsk Nosov Mining and Metallurgical Institute), Magnitogorsk, 2005, pp. 75–77.
FUNDING
Financial support was provided by the Russian Ministry of Education and Science (project 11.2054.2017/4.6) as part of its 2017–2019 program.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Bratkovskii, E.V., Shapovalov, A.N. & Dema, R.R. Decreasing the Impact–Abrasive Wear of Steel. Russ. Engin. Res. 39, 480–484 (2019). https://doi.org/10.3103/S1068798X19060091
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19060091