Abstract
A shaping method is proposed for cutting a trapezoidal thread on a spindle shaft. This method offers the possibility of using cutters with the same profile in cutting threads of different inclination, depending on the corresponding tolerances.
Similar content being viewed by others
REFERENCES
GOST (State Standard) 24737–81: Basic Norms of Interchangeability. Trapezoidal Single-Start Screw Thread. Basic Dimensions, Moscow: Izd. Standartov, 1981.
GOST (State Standard) 24738–81: Basic Norms of Interchangeability. Trapezoidal Single-Start Screw Thread. Diameters and Pitches, Moscow: Izd. Standartov, 1981.
GOST (State Standard) 24739–81: Basic Norms of Interchangeability. Trapezoidal Multistart Screw Thread, Moscow: Izd. Standartov, 1981.
Isaev, A., Grechishnikov, V., Petuhov, Yu., and Peretya-gin, P., Structure and machinability of thin-walled parts made of titanium alloy powder using electron beam melting technology, IOP Conf. Ser.: Mater. Sci. Eng., 2016, vol. 123, no. 012044.
Isaev, A., Grechishnikov, V., Pivkin, P., et al., Physical mechanism of ultrasonic machining, IOP Conf. Ser.: Mater. Sci. Eng., 2016, vol. 123, no. 012045.
Isaev, A.V., Grechishnikov, V.A., Pivkin, P.M., et al., Machining of thin-walled parts produced by additive manufacturing technologies, Proc. CIRP, 2016, vol. 48, pp. 1023–1026.
Grechishnikov, V.A., Khusainov, R.M., Yurasov, S.Yu., and Khaziev, R.R., Reliability in gear shaping, Russ. Eng. Res., 2016, vol. 36, no. 9, pp. 791–795.
Grechishnikov, V.A., Petukhov, Y.E., Isaev, A.V., et al., Lathe turning of complex-shaped parts providing desired surface microrelief, Russ. Eng. Res., 2016, vol. 36, no. 3, pp. 229–231.
Grechishnikov, V.A., Khusainov, R.M., Akhkiyamov, D.R., and Yurasova, O.I., Identifying the primary rigidity axes in the elastic system of a metal-cutting machine, Russ. Eng. Res., 2016, vol. 36, no. 8, pp. 673–676.
Isaev, A., Grechishnikov, V., Pivkin, P., et al., Structure and machinability of thin-walled parts made of titanium alloy powder using electron beam melting technology, J. Silic.-Based Compos. Mater., 2016, vol. 68, no. 2.
Grechishnikov, V.A., Petukhov, Yu.E., Pivkin, P.M., et al., Prediction and measurement of the parameters of the microtopography of a surface when turning intricately shaped parts, Meas. Tech., 2015, vol. 58, no. 8, pp. 848–853.
Grechishnikov, V.A., Maslov, A.R., and Pivkin, P.M., Tool system for face grooving using CNC machines, Russ. Eng. Res., 2015, vol. 35, no. 11, pp. 814–817.
Grechishnikov, V.A., Pivkin, P.M., and Isaev, A.V., Improving the precision of complex parts in external turning, Russ. Eng. Res., 2015, vol. 35, no. 12, pp. 892–895.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Grechishnikov, V.A., Petukhov, Y.E., Romanov, V.B. et al. Improved Precision of Trapezoidal Thread. Russ. Engin. Res. 38, 1018–1021 (2018). https://doi.org/10.3103/S1068798X18120079
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18120079