Abstract
The turning of discontinuous surfaces by cutters with handles of different structure is studied experimentally.
Similar content being viewed by others
REFERENCES
Kudinov, V.A., Dinamika stankov (Dynamics of Machines), Moscow: Mashinostroenie, 1967.
Grechishnikov, V.A., Efficiency improvement of instruments, Tekhnol. Mashinostr., 2010, no. 3, pp. 26–29.
Grechishnikov, V.A. and Pivkin, P.M., Cutting heads for trimming and cutting channels with a conical generatrix and end channels in parts of different configuration, Vestn. Mosk. Gos. Tekh. Univ., Stankin, 2014, no. 2 (29), pp. 50–56.
Borodkin, N.N., The vibration stability improvement of the technological system using cutters with structured holders, Doctoral (Eng.) Dissertation, Tula, 2011.
Vasin, S.A., Dinamika rezhushchego instrumenta s korpusami iz netraditsionnykh materialov: monografiya (Dynamics of the Cutting Tool with Cases from Nontraditional Materials: Monograph), Tula, 2002.
Borodkin, N.N., The influence of coordinate links on the balance of the technological system during cutting, Izv. Tul’sk. Gos. Univ., Ser. Tekh. Nauki, 2010, no. 4, pp. 137–144.
Grechishnikov, V.A., Maslov, A.R., and Pivkin, P.M., The system of turning cutters for machining the frontals on CNC machines, Vestn. Mosk. Gos. Tekh. Univ., Stankin, 2015, no. 2 (33), pp. 23–29.
Grechishnikov, V.A. and Pivkin, P.M., Modeling the roughness formation on the product surface depending on parameters of the cutting tool and the shape of the forming part during machining, Vestn. Mosk. Gos. Tekh. Univ., Stankin, 2014, no. 4 (31), pp. 59–66.
Vasin, S.A., Vasin, L.A., and Borodkin, N.N., RF Patent 2281196, Byull. Izobret., 2006, no. 29.
Vasin, S.A., Vasin, L.A., and Borodkin, N.N., RF Patent 2217267, Byull. Izobret., 2003, no. 33.
Vasin, S.A., Vasin, L.A., and Borodkin, N.N., RF Patent 2280542, Byull. Izobret., 2006, no. 21.
Vasin, S.A., Vasin, L.A., Borodkin, N.N., and Kosheleva, A.A., RF Patent 68389, Byull. Izobret., 2007, no. 33.
ACKNOWLEDGMENTS
Financial support was provided by Tula State University (project 2017-64PUBL).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Borodkin, N.N., Vasin, L.A. & Vasin, S.A. Turning of Discontinuous Surfaces by Cutters with Handles of Different Structure. Russ. Engin. Res. 38, 809–813 (2018). https://doi.org/10.3103/S1068798X18100076
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18100076