Abstract
The structure of the force field near the cutter tip is considered, as well as the influence of the coordinate coupling and the rigidity axes on the stability of the technological system. The influence of coordinate coupling is decreased by using highly damping handles.
Similar content being viewed by others
REFERENCES
Kudinov, V.A., Dinamika stankov (Dynamics of Machines), Moscow: Mashinostroenie, 1967.
Lazarev, G.S., Avtokolebaniya pri rezanii metallov (Autooscillations during Metal Cutting), Moscow: Vysshaya Shkola, 1971.
Grechishnikov, V.A., Efficiency improvement of instruments, Tekhnol. Mashinostr., 2010, no. 3, pp. 26–29.
Borodkin, N.N., The influence of coordinate links on the balance of the technological system during cutting, Izv. Tul’sk. Gos. Univ., Ser. Tekh. Nauki, 2010, no. 4, pp. 108–118.
Grechishnikov, V.A. and Pivkin, P.M., Cutting heads for trimming and cutting channels with a conical generatrix and end channels in parts of different configuration, Vestn. Mosk. Gos. Tekh. Univ., Stankin, 2014, no. 2 (29), pp. 50–56.
Vasin, S.A., Dinamika rezhushchego instrumenta s korpusami iz netraditsionnykh materialov: monografiya (Dynamics of the Cutting Tool with Cases from Nontraditional Materials: Monograph), Tula, 2002.
Borodkin, N.N., The influence of the orientation of the stiffness and dissipation ellipses on the equilibrium of the dynamic cutting system, Izv. Tul’sk. Gos. Univ., Ser. Tekh. Nauki, 2010, no. 4, pp. 118–125.
Grechishnikov, V.A., Maslov, A.R., and Pivkin, P.M., The system of turning cutters for machining the frontals on CNC machines, Vestn. Mosk. Gos. Tekh. Univ., Stankin, 2015, no. 2 (33), pp. 23–29.
Borodkin, N.N., The vibration stability improvement of the technological system using cutters with structured holders, Doctoral (Eng.) Dissertation, Tula, 2011.
Grechishnikov, V.A. and Pivkin, P.M., Modeling the roughness formation on the product surface depending on parameters of the cutting tool and the shape of the forming part during machining, Vestn. Mosk. Gos. Tekh. Univ., Stankin, 2014, no. 4 (31), pp. 59–66.
Vasin, S.A., Vasin, L.A., and Borodkin, N.N., RF Patent 2217267, Byull. Izobret., 2003, no. 33.
ACKNOWLEDGMENTS
Financial support was provided by Tula State University (project 2017-65PUBL).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Borodkin, N.N., Vasin, L.A. & Vasin, S.A. Structure of the Force Field near the Cutter Tip with a Highly Damping Handle. Russ. Engin. Res. 38, 802–808 (2018). https://doi.org/10.3103/S1068798X18100064
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18100064