Abstract
The application of aluminum coatings to steel surfaces in vibrational finishing is experimentally studied. Such mechanical coatings are applied at elevated temperatures (120–300°С) by means of aluminum powder.
Similar content being viewed by others
References
Babichev, A.P. and Babichev, I.A., Osnovy vibratsionnoi tekhnologii (Fundamentals of Vibration Technology), Rostov–on–Don: Don State Technical University, 2008.
Ankudimov, Yu.P. and Ankudimov, P.Yu., Operational capabilities of the vibration processing method under complex energy influence on the technological system, Uprochnyayushchie Tekhnol. Pokrytiya, 2012, no. 8, pp. 26–28.
Babichev, A.P., Ankudimov, Yu.P., and Sadovaya, I.V., Formation of a modified layer on a steel surface under vibrational mechanothermal treatment, Vestnik of P.A. Solovyov Rybinsk State Aviation Technical University, 2017, no. 2 (41), pp. 52–56.
Hamouda, K., Sayah, T., Ankudimov, J.P., et al., Complex change in superficial layer properties of specimen obtained by metallurgical powder under vibration process method, Defect Diffus. Forum, 2010, vols. 297–301, pp. 1103–1108.
Ankudimov, Yu.P., Chernega, Yu.G., and Reizvikh, V.A., Intensive diffusion of zinc during its coating on steel surface by vibration mechanical–chemical–thermal treatment, Trudy mezhdunarodnogo nauchnogo simpoziuma tekhnologov–mashinostroitelei i mekhanikov “Volnovye i vibrovolnovye tekhnologii v mashinostroenii, metalloobrabotke i drugikh otraskyakh,” 7–10 oktyabrya 2014 g. (Proc. Int. Sci. Symp. of Technologists and Mechanics in Machine Engineering “Wave and Vibrowave Technologies in Machine Engineering, Metal Treatment, and Other Industries,” October 7–10, 2014), Rostov–on–Don: Don State Technical University, 2014, pp. 306–311.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.P. Ankudimov, I.V. Sadovaya, M.M. Chaava, L.V. Tolmacheva, Yu.G. Chernega, 2018, published in STIN, 2018, No. 3, pp. 32–34.
About this article
Cite this article
Ankudimov, Y.P., Sadovaya, I.V., Chaava, M.M. et al. Application of Aluminum Coatings in Vibrational Finishing of Steel Parts. Russ. Engin. Res. 38, 733–734 (2018). https://doi.org/10.3103/S1068798X18090058
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18090058