Abstract
The roughness in face turning of large-diameter cylindrical parts is experimentally studied. Parts made of materials that differ in machinability are turned. Recommendations are made regarding the cutting conditions that ensure the elimination of buildup in the face turning of large-diameter parts.
Similar content being viewed by others
References
Suslov, A.G., Kachestvo poverkhnostnogo sloya detalei mashin (The Quality of the Surface Layer of Machine Parts), Moscow: Mashinostroenie, 2000.
Granovskii, G.I. and Granovskii, V.G., Rezanie metallov: uchebnik dlya mashinostroitel’nykh i priborostroitel’nykh spetsial’nostei vuzov (Metal Cutting: Manual for Students of Machine and Device Engineering Specialties), Moscow: Vysshaya Shkola, 1985.
Makarov, A.D., Optimizatsiya protsessov rezaniya (Optimization of Cutting Processes), Moscow: Mashinostroenie, 1976.
Arbizu, I.P. and Pérez, C.J.L., Surface roughness prediction by factorial design of experiments in turning processes, J. Mater. Process. Technol., 2003, vols. 143–144, pp. 390–396.
Benardos, P.G. and Vosniakos, G.-C., Predicting surface roughness in machining: a review, Int. J. Mach. Tools Manuf., 2003, vol. 43, no. 8, pp. 833–844.
Cakir, M.C., Ensarioglu, C., and Demirayak, I., Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material, J. Mater. Process. Technol., 2009, vol. 209, no. 1, pp. 102–109.
Dreval’, A.E. and Luzhanskii, M.S., Build-up forming and working capacity of cutting tools, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2012, no. 12, pp. 3–7.
Danilenko, B.D. and Yurenkova, L.R., Build-up forming at turning by high-speed shaped cutters, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2014, no. 2, pp. 77–80.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.I. Tokarev, A.S. Kuznetsov, A.O. Trofimov, L.D. Sirotenko, 2018, published in STIN, 2018, No. 1, pp. 29–32.
About this article
Cite this article
Tokarev, D.I., Kuznetsov, A.S., Trofimov, A.O. et al. Surface Roughness in Face Turning of Large-Diameter Parts. Russ. Engin. Res. 38, 563–565 (2018). https://doi.org/10.3103/S1068798X18070183
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18070183