Abstract
The hobbing of external gears by a worm mill without machining fluid is considered, theoretically and experimentally. The performance of worm cutters made of high-speed powder steel is investigated.
Similar content being viewed by others
References
Polokhin, O.A., Tarapanov, A.S., and Kharlamov, G.A., Narezanie zubchatykh profilei instrumentami chervyachnogo tipa: Spravochnik (Cutting of Tooth Profiles by Worm-type Tools: Handbook), Moscow: Mashinostroenie, 2007.
Kalashnikov, A.S., Development trends in gearing, Ritm, 2016, no. 3, pp. 14–18.
Kalashnikov, A.S., Morgunov, Yu.A., and Kalashnikov, P.A., Analysis of finishing methods of the teeth of cylindrical for industrial purpose, Spravochnik. Inzh. Zh., 2010, no. 4, pp. 21–27.
Abler, J., Felten, K., and Kobialka, C., Verzahntechnik: Informationen für die Praxis, Kempten: Liebherr-Verzahntechnik, 2003.
Loktev, D.A., Tool materials of modern worm cutters, Metalloobrabotka, 2007, no. 6, pp. 16–24.
Kalashnikov, A.S., Morgunov, Yu.A., and Kalashnikov, P.A., Improvement of the production efficiency of cylindrical gear wheels, Avtom. Prom-st, 2010, no. 11, pp. 26–28.
Astakhov, Yu.P., Kochergin, S.A., Morgunov, Yu.A., et al., Microprocessing of surface reliefs by physical and chemical methods, Naukoemkie Tekhnol. Mashinostr., 2012, no. 7, pp. 33–38.
Kalashnikov, A.S., Morgunov, Yu.A., and Kalashnikov, P.A., Modern methods of gear grinding of cylindrical wheels, Spravochnik. Inzh. Zh., 2010, no. 5, pp. 28–31.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Kalashnikov, Yu.A. Morgunov, P.A. Kalashnikov, N.V. Khomyakova, 2018, published in Vestnik Mashinostroeniya, 2018, No. 4, pp. 73–77.
About this article
Cite this article
Kalashnikov, A.S., Morgunov, Y.A., Kalashnikov, P.A. et al. Hobbing of Cylindrical Gears without Machining Fluid. Russ. Engin. Res. 38, 529–533 (2018). https://doi.org/10.3103/S1068798X18070080
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18070080