Abstract
The influence of electromechanical treatment on the hardening of VT22 titanium alloy is determined. The microstructure of the hardened surfaces is investigated, and the hardness is measured at different depths. Recommendations are made regarding the selection of electromechanical treatment methods.
Similar content being viewed by others
References
Arzamasov, B.M., Makarova, V.I., Mukhin, G.G., et al., Materialovedenie. Uchebnik dlya vuzov (Material Science: Manual for Higher Education Institutions), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2004.
Askinazi, B.M., Uprochnenie i vosstanovlenie detalei mashin elektromekhanicheskoi obrabotkoi (Reinforcing and Reparation of Machine Parts by Electromechanical Processing), Moscow: Mashinostroenie, 1989.
Bagmutov, V.P., Parshev, S.N., Dudkina, N.G., et al., Elektromekhanicheskaya obrabotka: tekhnologicheskie i fizicheskie osnovy, svoistva, realizatsiya (Electromechanical Processing: Technological and Physical Principles, Properties, and Implementation), Novosibirsk: Nauka, 2003.
Yakovlev, S.A., Improvement of cyclic strength of parts, Stanki Instrum., 2003, no. 4, pp. 27–32.
Yakovlev, S.A. and Zhiganov, V.I., Electromechanical processing on lathe-screw-cutting machines, Stanki Instrum., 2000, no. 6, pp. 11–16.
Yakovlev, S.A., The parameters of electromechanical processing of machine parts on metal cutting machines, Stanki Instrum., 2014, no. 2, pp. 37–42.
Yakovlev, S.A., Vliyanie elektrofizicheskikh parametrov na elektromekhanicheskuyu obrabotku detalei mashin: Monografiya (Influence of Electrophysical Parameters on Electromechanical Processing of Machine Parts: Monograph), Ulyanovsk: Ul’yanovsk. Inst. Grazhd. Aviats., 2014.
GOST (State Stndard) R ISO 6507-1–2007: Metals and Alloys. Vickers Hardness Test. Part 1. Test Method, Moscow: Standartinform, 2008.
Beckert, M. and Klemm, H., Handbuch der metallographischen Ätzverfahren, Leipzig: VEB Deutscher Verlag für Grundstoffindustrie, 1985.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.A. Yakovlev, M.M. Zamal’dinov, Yu.V. Nuretdinova, A.L. Mishanin, V.N. Igonin, M.V. Sotnikov, V.V. Khabarova, 2017, published in STIN, 2017, No. 12, pp. 26–28.
About this article
Cite this article
Yakovlev, S.A., Zamal’dinov, M.M., Nuretdinova, Y.V. et al. Electromechanical Hardening of VT22 Titanium Alloy in Screw-Cutting Lathes. Russ. Engin. Res. 38, 488–490 (2018). https://doi.org/10.3103/S1068798X18060199
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18060199