Abstract
The radius of the circle tangential to the axes of all the holes being machined is established. A method is proposed for selecting the workpiece position in the machining of several holes.
Similar content being viewed by others
References
Prilutskii, V.A., Tekhnologicheskoe obespechenie tochnosti i kachestva poverkhnostnogo sloya detalei mashin putem upravleniya periodicheskimi pogreshnostyami obrabotki (Technological Procuring of Precision and Quality of Surface Layer of Machine Parts by the Control of Periodic Errors of Treatment), Samara: Samarsk. Gos. Tekh. Univ., 2004.
Eremin, A.V., Prilutskii, V.A., Kulagin, Yu.A., et al., USSR Inventor’s Certificate no. 1238935, 1986.
Eremin, A.V., Amel’kin, I.N., Prilutskii, V.A., and Kulagin, Yu.A., USSR Inventor’s Certificate no. 1331628, 1987.
Spravochnik tekhnologa-mashinostroitelya (Handbook of Technologist-Machine Engineer), Dal’skii, A.M., Kosilova, A.G., Meshcheryakov, R.K., et al., Moscow: Mashinostroenie, 2001. T.1.
Kosilova, A.G., Lykov, A.G., Deev, O.M., et al., Spravochnik tekhnologa po avtomaticheskim liniyam (Handbook of Technologist of Automatic Manufacturing Lines), Kosilova, A.G., Moscow: Mashinostroenie, 1982.
Eremin, A.V., Prilutskii, V.A., Bykov, E.V., and Kuzub, Yu.I., USSR Inventor’s Certificate no. 904978, 1982.
Eremin, A.V., Budarina, G.I., Prilutskii, V.A., et al., USSR Inventor’s Certificate no. 1009642, 1983.
Eremin, A.V., Budarina, G.I., and Prilutskii, V.A., USSR Inventor’s Certificate no. 914197, 1982.
Dal’skii, A.M., Suslov, A.G., Nazarov, Yu.F., et al., Mashinostroenie: entsiklopediya. Razdel 3. Tekhnologiya proizvodstva mashin. Tom III-3. Tekhnologiya izgotovleniya detalei mashin (Machine Engineering: Encyclopedia, Chap. 3: Technology of Machine Production, Vol. 3-3: Technology of Machine Part Production), Suslov, A.G., Ed., Moscow: Mashinostroenie, 2000.
Prilutskii, V.A., Razrabotka struktury tekhnologicheskogo protsessa izgotovleniya detali: uchebnoe posobie (Development of the Technology of a Machine Part Manufacturing: Manual), Samara: Samarsk. Gos. Tekh. Univ., 2008.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Prilutskii, 2017, published in STIN, 2017, No. 9, pp. 34–38.
About this article
Cite this article
Prilutskii, V.A. Workpiece Position in the Machining of Multiple Holes. Russ. Engin. Res. 38, 235–240 (2018). https://doi.org/10.3103/S1068798X18030176
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18030176