Abstract
Optimal batch composition is developed for porous permeable SHS cermets that may be used in processing smokestack gases at factories and also auto exhaust emissions. The physicomechanical properties of the cermets are determined when different batch compositions are employed. The permissible range of vibrational frequencies when such cermets are used as filters is determined.
Similar content being viewed by others
References
Vereshchagin, V.I., Tubalov, N.P., and Lebedev, O.A., Porous composite ceramic materials produced by a selfpropagating high-temperature synthesis in the Fe2O3–Al2O3–Al system, Refract. Ind. Ceram., 2003, vol. 44, no. 5, pp. 343–345.
Vereshchagin, V.I., Tubalov, N.P., and Evstigneev, V.V., Self-propagating high-temperature synthesis technology for preparation of porous permeable materials, Refract. Ind. Ceram., 2005, vol. 46, no. 6, pp. 416–418.
Tubalov, N.P. and Lebedev, O.A., Structure and operational properties of porous metal-ceramic materials based on dross of alloyed steels, Izv. Tomsk. Politekh. Univ., 2007, vol. 311, no. 2, pp. 142–146.
Brazovskii, V.V., Kashkarov, G.M., Sitnikov, A.A., et al., The parameters affecting the quality of exhaust gas purification, Polzunovskii Vestn., 2012, no. 3/1, p.224.
Gorlova, N.N., Kolomeets, M.A., Medvedev, G.V., and Sitnikov, A.A., Influence of technology of manufacturing of a porous composite material of a catalytic converter of exhaust gases of diesel engines on its microstructure, Polzunovskii Vestn., 2014, no. 4, pp. 200–203.
Baklanov, A.E., Production of porous permeable materials using polymetal ores instead of rare earth elements, Polzunovskii Vestn., 2016, no. 2, pp. 205–212.
Geineman, A.A., Goncharov, V.D., Novoselov, A.L., and Shchetinina, N.Yu., Purification of gas and liquid media by metal-ceramic self-propagating high-temperature synthesis filters, Izv. Tomsk. Politekh. Univ., 2007, vol. 311, no. 2, pp. 146–150.
Kolomeets, M.A., Tubalov, N.P., and Novoselov, A.L., Vibration of catalytic filters of exhaust diesel gas neutralizers, Polzunovskii Vestn., 2012, no. 3, p.7.
Baklanov, A.E., Baklanova, O.E., Kanapinov, M.S., et al., SVS-materialy dlya ochistki otrabotavshikh gazov dizelei: Monografiya (SHS Materials for Purification of Exhausted Diesel Gases: Monograph), Ust’-Kamenogorsk: Vost.-Kazakh. Gos. Tekh. Univ., 2016.
Evstigneev, V.V., Tubalov, N.P., and Lebedev, O.A., Improvement of the strength of porous materials produced by self-propagating high-temperature synthesis in the iron oxides–aluminum oxide–aluminum-ferrosilicon system, Perspekt. Mater., 2005, no. 6, p.70.
Naiborodenko, Yu.S., Itin, V.I., and Bratchikov, A.D., The combustion patterns of composite metal systems, Materialy XII Vserossiiskogo simpoziuma po goreniyu i vzryvu (Proc. XII All-Russ. Symp. on Combustion and Explosion), Chernogolovka, 2000, vol. 1, pp. 117–119.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © T.V. Novoselova, L.V. Tolmacheva, Yu.G. Chernega, M.A. Kolomeets, A.V. Maetskii, N.P. Tubalov, O.V. Yakovleva, 2017, published in Vestnik Mashinostroeniya, 2017, No. 12, pp. 64–69.
About this article
Cite this article
Novoselova, T.V., Tolmacheva, L.V., Chernega, Y.G. et al. Porous Permeable SHS Cermets Based on Iron and Aluminum Oxides. Russ. Engin. Res. 38, 182–188 (2018). https://doi.org/10.3103/S1068798X18030139
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18030139