Abstract
The proposed planetary reaming method permits discontinuous turning in which the cutting edge moves relative to the cutting surfaces. As a result, individual sections of the cutting zone move successfully in and out of the machining zone. Discontinuous turning is free of the deficiencies of continuous turning.
Similar content being viewed by others
References
Andreev, V.N., Sovershenstvovanie rezhushchego instrumenta (Improvement of Cutting Tool), Moscow: Mashinostroenie, 1989.
Grechishnikov, V.A., Yashkov, V.A., Albagachiev, A.Yu., et al., Modernization of assembled abrasive wheel with radially movable segments for internal grinding of hollow parts of robots, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 4 (35), pp. 8–14.
Grechishnikov, V.A., Isaev, A.V., and Romanov, V.B., The profile formation of the initial tool surface of prefabricated shaped milling cutters with cutting plates located along the screw line, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 1 (32), pp. 8–12.
Grechishnikov, V.A., Malygin, V.I., and Perfil’ev, P.V., The dynamic of assembly accuracy of the complex tool at the design stage, Vestn. Mashinostr., 1996, no. 6, pp. 24–27.
Grechishnikov, V.A., Domnin, P.V., Kosarev, V.A., et al., Shaping by means of complex cutting tools, Russ. Eng. Res., 2014, vol. 34, no. 7, pp. 461–465.
Petukhov, Yu.E. and Domnin, P.V., Formoobrazovanie fasonnykh vintovykh poverkhnostei instrumentov na osnove primeneniya standartnykh kontsevykh i tortsevykh frez (Shaping of Screw Surfaces of Tools Using Standard End and Face Mills), Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2012.
Grigoriev, S.N., Vereschaka, A.A., Vereschaka, A.S., and Kutin, A.A., Cutting tools made of layered composite ceramics with nano-scale multilayered coatings, Proc. CIRP, 2012, vol. 1, pp. 318–323.
Grechishnikov, V.A., Maslov, A.R., and Pivkin, P.M., The system of turning tools for the treatment of the end grooves on CNC machines, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 2 (33), pp. 23–29.
Grechishnikov, V.A., Romanov, V.B., Ryabov, E.A., et al., Profile design of shaper cutter with any desired geometrical parameters, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2012, no. 4 (23), pp. 15–17.
Grechishnikov, V.A., Petukhov, Yu.E., Kosarev, V.A., et al., Instrumental’naya tekhnika, tekhnologiya izgotovleniya v SAPR RI: uchebnoe posobie (Instrumental Technique and Production Technology in CAD RI: Manual), Grechishnikov, V.A., Ed., Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2015.
Grechishnikov, V.A., Domnin, P.V., Isaev, A.V., Petukhov, Yu.E., and Romanov, V.B., Formoobrazovanie i kontrol’ rezhushchikh instrumentov: uchebnoe posobie (Shaping and Control of Cutting Tools: Manual), Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2015.
Grechishnikov, V.A. and Pivkin, P.M., Modeling of development of roughness of the product depending on parameters of cutting tool and shape of forming mold at mechanical processing, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2014, no. 4 (31), pp. 59–66.
Petukhov, Yu.E. and Domnin, P.V., Determination of kinematic rear corners during processing of the screwshaped surfaces by standard straight profile cutters, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2014, no. 2 (29), pp. 27–33.
Isaev, A.V., Porvatov, A.N., and Kozochkin, M.P., Diagnostics of debugging of new technological processes, Stanochnyi Park, 2011, no. 10, p. 16.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Original Russian Text © V.A. Grechishnikov, V.V. Kuts, M.S. Razumov, V.B. Romanov, P.M. Pivkin, A.N. Grechukhin, S.Yu. Yurasov, 2017, published in STIN, 2017, No. 4, pp. 24–26.
About this article
Cite this article
Grechishnikov, V.A., Kuts, V.V., Razumov, M.S. et al. Errors in shaping by a planetary mechanism. Russ. Engin. Res. 37, 824–826 (2017). https://doi.org/10.3103/S1068798X17090118
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17090118