Abstract
Parameter specification in the trochoidal machining of a slot of constant width is considered. A formula is proposed for the displacement increment of the shaping circle as a function of the cutting depth.
Similar content being viewed by others
References
Kondrashov, A.G., Safarov, D.T., and Davletshina, G.K., Bit for the core drilling of nonmetals, Russ. Eng. Res., 2015, vol. 35, no. 8, pp. 617–618.
Aliev, R., The optimal CNC program for high-speed milling, SAPR Graf., 2002, no. 11.
Chemborisov, N.A. and Kondrashov, A.G., End machining of teeth by a single-turn worm mill, Russ. Eng. Res., 2008, vol. 28, no. 8, pp. 809–811.
Evchenko, K.G., Maslov, D.A., Pinchuk, A.V., and Talikin, S.A., Vortex strategy and Machine DNA optimization technology from Delcam Company are new possibilities to improve milling performance, Avtom. Prom., 2013, no. 5, pp. 20–22.
Golovko, A.N. and Golovko, I.V., Errorsinthegeartoothprofileinshaving, Russ. Eng. Res., 2013, vol. 33, no. 5, pp. 309–311.
Golovko, A.N. and Golovko, I.V., Optimal design parameters of a shaving hob for compensation of the systematic error in the gear-tooth profile, Russ. Eng. Res., 2013, vol. 33, no. 7, pp. 427–428.
Balabanov, I.P. and Kondrashov, A.G., Shaping of cutting part of angle milling cutters with nonzero geometry, World Appl. Sci. J., 2014, vol. 30, no. 12, pp. 1731–1734.
Grechishnikov, V.A., Petukhov, Yu.E., Kosarev, V.A., et al., Instrumental’naya tekhnika, tekhnologiya izgotovleniya v SAPR RI: uchebnoe posobie (Instrumental Technique and Production Technology in CAD RI: Manual), Grechishnikov, V.A., Ed., Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2015.
Grechishnikov, V.A., Petukhov, Yu.E., Pivkin, P.M., et al., Prediction and measurement of the parameters of the microtopography of a surface when turning intricately shaped parts, Meas. Tech., 2015, vol. 58, no. 8, pp. 848–853.
Grechishnikov, V.A., Maslov, A.R., and Pivkin, P.M., The system of turning tools for the treatment of the end grooves on CNC machines, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 2 (33), pp. 23–29.
Petukhov, Yu.E. and Domnin, P.V., Determination of kinematic rear corners during processing of the screwshaped surfaces by standard straight profile cutters, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2014, no. 2 (29), pp. 27–33.
Grechishnikov, V.A., Maslov, A.R., and Pivkin, P.M., The system of turning tools for the treatment of the end grooves on CNC machines, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 2 (33), pp. 23–29.
Grechishnikov, V.A., Yashkov, V.A., Albagachiev, A.Yu., et al., Modernization of assembled abrasive wheel with radially movable segments for internal grinding of hollow parts of robots, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 4 (35), pp. 8–14.
Grechishnikov, V.A., Isaev, A.V., and Romanov, V.B., The profile formation of the initial tool surface of prefabricated shaped milling cutters with cutting plates located along the screw line, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 1 (32), pp. 8–12.
Petukhov, Yu.E. and Domnin, P.V., Formoobrazovanie fasonnykh vintovykh poverkhnostei instrumentov na osnove primeneniya standartnykh kontsevykh i tortsevykh frez (Shaping of Screw Surfaces of Tools Using Standard End and Face Mills), Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2012.
Kosarev, V.A., Grechishnikov, V.A., and Kosarev, D.V., Improvement of the vibration resistance of the assembled cutting tool, Spravochnik. Inzh. Zh., 2009, no. 5, pp. 27–30.
Grechishnikov, V.A., Petukhov, Yu.E., Kosarev, V.A., et al., Instrumental’naya tekhnika, tekhnologiya izgotovleniya v SAPR RI: uchebnoe posobie (Instrumental Technique and Production Technology in CAD RI: Manual), Grechishnikov, V.A., Ed., Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2015.
Grechishnikov, V.A., Domnin, P.V., Isaev, A.V., Petukhov, Yu.E., and Romanov, V.B., Formoobrazovanie i kontrol’ rezhushchikh instrumentov: uchebnoe posobie (Shaping and Control of Cutting Tools: Manual), Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2015.
Grechishnikov, V.A., Romanov, V.B., Ryabov, E.A., et al., Profile design of shaper cutter with any desired geometrical parameters, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2012, no. 4 (23), pp. 15–17.
Grechishnikov, V.A., Isaev, A.V., Ilyukhin, Yu.V., et al., Engineering concept of robotic systems for metalworking and tool support systems, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 4 (35), pp. 46–51.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Original Russian Text © V.A. Grechishnikov, Yu.E. Petukhov, P.M. Pivkin, V.B. Romanov, E.A. Ryabov, S.Yu. Yurasov, O.I. Yurasova, 2017, published in STIN, 2017, No. 4, pp. 21–23.
About this article
Cite this article
Grechishnikov, V.A., Petukhov, Y.E., Pivkin, P.M. et al. Trochoidal slot milling. Russ. Engin. Res. 37, 821–823 (2017). https://doi.org/10.3103/S1068798X17090106
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17090106