Abstract
Optimization of the application of electroacoustic coatings is considered, taking account of their structure, properties, and environmental impact.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Gadalov, V.N. and Ryzhkov, F.N., Local recovery of components of high-pressure turbines (turbocompressors) by plasma, electric spark, electroacoustic spraying and laser treatment, Materialy VI Rossiiskoi nauchnotekhnicheskoi konferentsii “Materialy i uprochnyayushchie tekhnologii,” Kursk (Proc. VI Russ. Sci.-Tech. Conf. “Materials and Strengthening Technologies,” Kursk), Kursk: Kursk. Gos. Tekh. Univ., 1998, pp. 4–6.
Gadalov, V.N., The electroacoustic production of coatings from high-chromium nickel alloys, Materialy Rossiiskoi nauchno-tekhnicheskoi konferentsii “Materialy i uprochnyayushchie tekhnologii–94,” Tezisy dokladov (Proc. Russ. Sci.-Tech. Conf. “Materials and Strengthening Technologies–94,” Abstracts of Papers), Kursk: Kursk. Gos. Tekh. Univ., 1994, pp. 5–6.
Gadalov, V.N., Emel’yanov, S.G., Romanenko, D.N., et al., Use of electroacoustic spraying for hardening and restoration of machine parts and tools, Svarshchik Ross., 2008, no. 1 (59), pp. 26–31.
Gadalov, V.N., Serebrovskii, V.I., and Pozdnyakov, M.V., Mathematical modeling of optimization of electroacoustic coating technology from heat-resistant nickel alloys, Materialy V mezhdunarodnoi konferentsii “Raspoznavanie–2001” (Proc. V Int. Conf. “Recognition–2001”), Kursk, 2001, part 2, pp. 352–354.
Sobol’, I.M. and Statnikova, R.B., Vybor optimal’nykh parametrov v zadachakh so mnogimi kriteriyami (The Choice of Optimal Parameters in Problems with Many Criteria), Moscow: Nauka, 1981.
Gadalov, V.N., Roshchupkin, V.M., and Popov, A.D., Improvement of performance characteristics of composites by electroacoustic processing, Mezhdunarodnaya nauchno-tekhnicheskaya konferentsiya “Progressivnye metody polucheniya i obrabotki konstruktsionnykh materialov i pokrytii, povyshayushchikh dolgovechnost’ detalei mashin,” Tezisy dokladov (Int. Sci.-Tech. Conf. “Advanced Production and Treatment of Construction Materials and Coatings Increasing Longevity of Machine Parts,” Abstracts of Papers), Volgograd: Volgograd. Gos. Tekh. Univ., 1996, pp. 158–159.
Gadalov, V.N. and Roshchupkin, V.M., Use of the electroacoustic coating production from high-chromium nickel alloys, Tret’e sobranie metallovedov Rossii, Tezisy dokladov (The Third Meeting of Metal Scientists, Abstracts of Papers), Ryazan: Neftekhimmashsistemy, 1996, pp. 21–22.
Gadalov, V.N., Alekhin, Yu.G., Skripkina, Yu.V., et al., Electric-spark coatings undergone the burnishing by mineral ceramics, Tekhnol. Mashinostr., 2008, no. 11, pp. 19–23.
Gadalov, V.N., Chernysheva, E.V., Samoilov, V.V., et al., Tools for finishing and strengthening treatment by burnishing, Tekhnol. Met., 2010, no. 4, pp. 41–44.
Gadalov, V.N., Sal’nikov, V.G., Romanenko, D.N., et al., Structural-phase state, properties of electroacoustical coating after smoothing by mineral ceramics, Izv. Yugo-Zap. Gos. Univ., 2012, no. 1 (40), pp. 107–113.
Gadalov, V.N., Gvozdev, A.E., Romanenko, D.N., Vornacheva, I.V., and Kovalev, S.V., Burnishing with wear-resistant mineral–ceramic and hard-alloy indenters, Russ. Eng. Res., 2016, vol. 36, no. 9, pp 731–734.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.N. Gadalov, S.G. Emel’yanov, S.V. Safonov, I.V. Vornacheva, A.V. Filonovich, 2017, published in Vestnik Mashinostroeniya, 2017, No. 6, pp. 7–9.
About this article
Cite this article
Gadalov, V.N., Emel’yanov, S.G., Safonov, S.V. et al. Electroacoustic coating application to improve the performance of composites based on heat-resistant nickel alloys. Russ. Engin. Res. 37, 751–753 (2017). https://doi.org/10.3103/S1068798X1709009X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1709009X