Abstract
Various types of operational faults in critical machine parts are analyzed. The possibility of eliminating the factors responsible for such faults at the manufacturing stage is considered. Thermodynamic analysis reveals the relation between the bulk wear rate and the surface quality.
Similar content being viewed by others
References
Ibatullin, I.D., Kinetika ustalostnoi povrezhdaemosti i razrusheniya poverkhnostnykh sloev: monografiya (Kinetics of Fatigue Damage and Destruction of Surface Layers: Monograph), Samara: Samar. Gos. Tekh. Univ., 2008.
Pogonyshev, V.A. and Logunov, V.V., Improvement of wear resistance of the crankshaft necks by coating the plastic metal films, Uprochnyayushchie Tekhnol. Pokrytiya, 2013, no. 6, pp. 47–48.
El’kin, S.Yu., Safonov, V.V., and Polupanov, I.T., Thermomechanical strengthening of restoring parts of agricultural machines, Uprochnyayushchie Tekhnol. Pokrytiya, 2013, no. 3, pp. 44–48.
Smolentsev, V.P., Pechagin, A.P., and Klimova, G.N., Modes and technology for stabilization of the geometry of parts by magnetic pulse processing, Uprochnyayushchie Tekhnol. Pokrytiya, 2012, no. 5, pp. 32–36.
Belov, V.K., D’yakova, M.V., D’yakov, P.A., and Zhelezkov, O.S., Influence of ultrasonic finishing modes on parameters of microtopography of machined surfaces, Uprochnyayushchie Tekhnol. Pokrytiya, 2013, no. 9, pp. 34–38.
Noskov, A.S., Korolev, A.V., Salimov, B.N., and Reshetnikova, O.P., Experimental ultrasound coating of graphite ointment on the surface of the bearing race, Uprochnyayushchie Tekhnol. Pokrytiya, 2013, no. 9, pp. 3–6.
Demin, P.B., Petrova, L.G., and Aleksandrov, V.A., Improvement of corrosion resistance of steel plugs on engines by combined metallization with aluminum and titanium, Uprochnyayushchie Tekhnol. Pokrytiya, 2013, no. 9, pp. 20–23.
Rakhimyanov, Kh.M. and Semenova, Yu.S., Modeling of a regular microrelief by ultrasonic plastic deformation, Uprochnyayushchie Tekhnol. Pokrytiya, 2010, no. 2, p.10.
Petrova, L.G., Aleksandrov, V.A., and Demin, P.E., Formation of nanostructured composite coatings on the steel parts of the submersible module for oil well logging by the chemical heat treatment in an adjustable saturating medium, Uprochnyayushchie Tekhnol. Pokrytiya, 2012, no. 6, pp. 22–25.
Kiryushin, I.E., Kiryushin, D.E., Nasad, T.G., and Venig, S.B., Benefits of high-speed milling, Russ. Eng. Res., 2012, vol. 32, no. 1, pp. 48–49.
Bez”yazychnyi, V.F., Metod podobiya v tekhnologii mashinostroeniya (Similarity Method in Machine Engineering), Moscow: Mashinostroenie, 2012.
Bez”yazychnyi, V.F., Drapkin, B.M., Prokof’ev, M.A., and Timofeev, M.V., The relationship between the characteristics of the substructure, the latent energy of deformation, the spent work and the degree of deformation of the material, Spravochnik. Inzh. Zh., 2005, no. 5, pp. 35–38.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.F. Bez”yazychnyi, A.N. Sutyagin, V.V. Nepomiluev, A.N. Semenov, 2017, published in Vestnik Mashinostroeniya, 2017, No. 6, pp. 66–70.
About this article
Cite this article
Bez”yazychnyi, V.F., Sutyagin, A.N., Nepomiluev, V.V. et al. Improving the wear resistance of machine parts. Russ. Engin. Res. 37, 779–783 (2017). https://doi.org/10.3103/S1068798X17090052
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17090052