Abstract
Means of increasing machine-tool reliability are considered. In particular, systems for monitoring machine tools are developed on the basis of the e-Mind Machine module and an expert system for flexible maintenance.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Sensor fused Intelligent Monitoring System for Machining (SIMON) project from Intelligent Manufacturing Systems (IMS). http://www.ims.org/2012/11/simon-sensor-fused-intelligentmonitoring-system-formachining/. Accessed December 3, 2014.
Lee, J., Ni, J., Djurdjanovic, D., Qiu, H., and Liao, H., Intelligent prognostics tools and e-maintenance, Comp. Ind., 2006, vol. 57, pp. 476–489.
Djurdjanovic, D., Lee, J., and Ni, J., Watchdog Agent—an infotronics-based prognostics approach for product performance degradation assessment and prediction, Adv. Eng. Inf., 2001, vol. 7, no. 3, pp. 109–125.
Moore, W.J. and Starr, A.G., An intelligent maintenance system for continuous cost-based prioritization of maintenance activities, Comp. Ind., 2006, vol. 6, pp. 595–606.
Wonderware System Platform, Condition based monitoring 3.0. http://www.wonderware.ru. Accessed December 12, 2015.
Kruglova, T.N. and Glebov, N.A., Diagnostirovanie i prognozirovanie tekhnicheskogo sostoyaniya mekhatronnykh modulei dvizheniya tekhnologicheskogo oborudovaniya. Monografiya (Diagnostics and Forecasting of Technical State of Mechatronic Modules of the Motion of Technological Equipment: Monograph), Novocherkassk, 2011.
Emmanouilidis, C., Jantunen, E., Gilabert, E., Arnaiz, A., and Starr, A., EMaintenance update: the road to success for modern industry, Proc. 24th Int. Congr. on Condition Monitoring and Diagnostic Engineering Management, Birmingham: COMADEM Int., 2011.
Tugengol’d, A.K., Voloshin, R.N., and Yushchenko, S.V., E-MIND MACHINE module in intelligent machine monitoring system, Mezhd. Nauchno-Issled. Zh., 2015, no. 9 (40), part 2, pp. 100–102.
Samodurov, G.V., Tugengol’d, A.K., Yudenkov, N.P., and Luk’yanov, E.A., Design of smart electronic documentation for machine tools, Russ. Eng. Res., 2013, vol. 33, no. 2, pp. 102–106.
Tugengol’d, A.K., Tishin, A.S., and Lysenko, A.F., Development of knowledge system for electronic documentation of mechatronic objects, Vestn. Donsk. Gos. Tekh. Univ., 2012, no. 3, pp. 30–36.
Tugengol’d, A.K., Smart-Passport okrytoi mekhatronnoi tekhnologicheskoi sistemy. Kontent/Intellektual’naya elektronnaya dokumentatsiya (Smart-Passport of Open Mechatronic Technological System, Content/Intelligent Electronic Documentation), Saarbrucken: LAP LAMBERT Academic, 2013.
Tugengol’d, A.K., Assessment of the situation and decision making by an intelligent system for the control of a technological object, Vestn. Donsk. Gos. Tekh. Univ., 2010, vol. 10, no. 6, pp. 860–867.
Pospelov, D.A., Situatsionnoe upravlenie: teoriya i praktika (Situational Management: Theory and Practice), Moscow: Nauka, 1986.
Tugengol’d, A.K. and Izyumov, A.I., Conceptual approach to creation of Instrument subsystem in smartpassport of multioperational machine, Vestn. Donsk. Gos. Tekh. Univ., 2014, vol. 14, no. 2, pp. 74–83.
Tugengol’d, A.K., Shchuchev, K.G., Izyumov, A.I., and Terekhov, D.Yu., Evaluation of the fuzzy limit of the tool durability of the multioperational machine, Vestn. Donsk. Gos. Tekh. Univ., 2015, vol. 15, no. 2 (81), pp. 33–41.
Tugengol’d, A.K., Dimitrov, V.P., Izyumov, A.I., and Yusupov, A.R., Monitoring and control of tools in multifunctional machine tools, Russ. Eng. Res., 2017, vol. 37, no. 5, pp. 440–446.
Kravchenko, V.M., Sidorov, V.A., and Sedush, V.Ya., Tekhnicheskoe diagnostirovanie mekhanicheskogo oborudovanie (Technical Diagnostics of Mechanical Equipment), Donetsk: Yugo-Vostok, 2009.
GOST (State Standard) R ISO 17359-2009: Condition Monitoring and Diagnostics of Machines. General Guidelines on Condition Monitoring and Diagnostics Procedures, Moscow: Standartinform, 2010.
Tugengol’d, A.K. and Luk’yanov, E.A., Intellektual’nye funktsii i upravlenie avtonomnymi tekhnologicheskimi mekhatronnymi ob”ektami (Intellectual Functions and Control of Automatic Technological Mechatronic Objects), Rostov-on-Don: Donsk. Gos. Tekh. Univ., 2013.
Zhernakov, S.V., Application of neural network technology for diagnostics of the technical state of aircraft engines, Intell. Sist. Proivod., 2006, no. 2, pp. 70–83.
Nikitin, Yu.R. and Abramov, I.V., Development of the diagnostic system of CNC machines, Mekhatron., Avtom. Uprav., 2011, no. 4, pp. 32–35.
Tugengol’d, A.K., Voloshin, R.N., and Yushchenko, S.V., Monitoring of the state of multi-operation machines based on the e-Mind Machine concept, Vestn. Donsk. Gos. Tekh. Univ., 2016, vol. 16, no. 1 (84), pp. 77–86.
Dimitrov, V.P., Borisova, L.V., and Nurutdinova, I.N., Assessment of the consistency of models of fuzzy expertise, Vestn. Donsk. Gos. Tekh. Univ., 2010, vol. 10, no. 2 (45), pp. 205–216.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.K. Tugengol’d, V.P. Dimitrov, R.N. Voloshin, L.V. Borisova, 2017, published in STIN, 2017, No. 3, pp. 11–17.
About this article
Cite this article
Tugengol’d, A.K., Dimitrov, V.P., Voloshin, R.N. et al. Monitoring of machine tools. Russ. Engin. Res. 37, 723–727 (2017). https://doi.org/10.3103/S1068798X17080196
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17080196