Abstract
The productivity in abrasive water-jet machining of titanium alloys and heat-resistant alloys is discussed. Empirical formulas for the rate of metal removal as a function of the machining parameters are presented.
Similar content being viewed by others
References
Provolotskii, A.E., Struino-abrazivnaya obrabotka detalei mashin (Jet Abrasive Treatment of Machine Parts), Kiev: Tekhnika, 1989.
Trofimov, N.G., Shmanev, V.A., Meshcheryakov, A.V., and Vtorov, E.A., Hydroabrasive jet machining of gas turbine engine blades, Aviats. Prom-st., 1987, no. 7, pp. 22–24.
Kozyrev, S.P., Gidroabrazivnyi iznos metallov pri kavitatsii (Hydroabrasive Wear of Metals during Cavitation), Moscow: Mashinostroenie, 1971.
Altukhova, V.V., Antsev, V.Yu., Vitchuk, P.V., et al., Progressivnye mashinostroitel’nye tekhnologii, oborudovanie i instrumenty: monografiya (Advanced Machine Engineering Technologies, Equipment, and Tools: Monograph), Moscow: Spektr, 2014, vol.3.
Zhu, H., Huang, C., Wang, J., Zhao, G., and Li, Q., Modeling material removal in fracture erosion for brittle materials by abrasive waterjet, Adv. Mater. Res., 2009, vol. 76–78, pp. 357–362.
Treatise on Material Science and Technology, Vol. 16: Erosion by Solid Particles Impact, Preece, C., Ed., New York: Academic, 1979.
Zhang, C., Zhang, Y., Zhang, F., and Luan, D., Study on removal model of abrasive water jet machining, J. Mech. Eng., 2015, vol. 51, no. 7, pp. 188–196.
Spiridonov, A.A., Planirovanie eksperimenta pri issledovanii tekhnologicheskikh protsessov (Planning of an Experiment for Research of Technological Processes), Moscow: Mashinostroenie, 1981.
Meshcheryakov, A.V., Shulepov, A.P., and Erkhov, I.V., Defining the parameters of waterjetmixture at the exit of the jet device, Vestn. Samar. Gos. Aerokosm. Univ., Ser. Probl. Persp. Razvit. Dvigatelestroeniya, 1998, no. 2, part 1, pp. 168–175.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Meshcheryakov, A.P. Shulepov, 2017, published in STIN, 2017, No. 3, pp. 37–40.
About this article
Cite this article
Meshcheryakov, A.V., Shulepov, A.P. Productivity of abrasive water-jet machining. Russ. Engin. Res. 37, 747–750 (2017). https://doi.org/10.3103/S1068798X17080111
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17080111