Abstract
A mathematical model is proposed for the drawing of axisymmetric two-layer parts in conical matrices, with thinning of the wall. The stress–strain state, forces, and limiting strain in this process are studied experimentally and theoretically.
Similar content being viewed by others
References
Kovka i shtampovka: spravochnik. Tom 4. Listovaya shtampovka (Pressing and Forging: Handbook, Vol. 4: Sheet Forging), Yakovlev, S.S., Ed., Moscow: Mashinostroenie, 2010.
Yakovlev, S.P., Yakovlev, S.S., and Andreichenko, V.A., Obrabotka davleniem anizotropnykh materialov (Pressure Treatment of Anisotropic Materials), Chisinau: Kvant, 1997.
Yakovlev, S.S., Kukhar’, V.D., and Tregubov, V.I., Teoriya i tekhnologiya shtampovki anizotropnykh materialov (Theory and Technology of the Forging of Anisotropic Materials), Yakovlev, S.S., Ed., Moscow: Mashinostroenie, 2012.
Aryshenskii, Yu.M. and Grechnikov, F.V., Teoriya i raschety plastichekogo formoizmeneniya anizotropnykh materialov (Theory and Calculations of Plastic Deformation of Anisotropic Materials), Moscow: Metallurgiya, 1990.
Grechnikov, F.V., Deformirovanie anizotropnykh materialov (Deformation of Anisotropic Materials), Moscow: Mashinostroenie, 1998.
Gryazev, M.V., Yakovlev, S.S., and Remnev, K.S., Mathematical model of extraction operation with wall thinning of bilayer of anisotropic materials in a conical matrix, Izv. Tul’sk. Gos. Univ., Ser. Tekh. Nauki, 2014, no. 1, pp. 66–76.
Gryazev, M.V., Yakovlev, S.S., and Remnev, K.S., Stress state and power modes of extraction with thinning of bilayer anisotropic hardening materials, Izv. Tul’sk. Gos. Univ., Ser. Tekh. Nauki, 2014, no. 3, pp. 128–137.
Golenkov, V.A., Yakovlev, S.P., Golovin, S.A., et al., Teoriya obrabotki metallov davleniem: uchebnik dlya vuzov (Theory of the Pressure Treatment of Metals: Manual for Higher Education Institutions), Golenkov, V.A. and Yakovlev, S.P., Eds., Moscow: Mashinostroenie, 2009.
Kolmogorov, V.L., Mekhanika obrabotki metallov davleniem (Mechanics of Metal Pressing), Yekaterinburg: Ural. Gos. Tekh. Univ., 2001.
Bogatov, A.A., Mekhanicheskie svoistva i modeli razrusheniya metallov (Mechanical Properties and Models of Metal Fracture), Yekaterinburg: Ural. Gos. Tekh. Univ., 2002.
Gryazev, M.V., Yakovlev, S.S., and Pilipenko, O.V., Mechanical properties of bilayer steel, Izv. Tul’sk. Gos. Univ., Ser. Tekh. Nauki, 2014, no. 10, part 1, pp. 20–27.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.S. Yakovlev, M.V. Gryazev, O.V. Pilipenko, 2016, published in Vestnik Mashinostroeniya, 2016, No. 11, pp. 45–51.
About this article
Cite this article
Yakovlev, S.S., Gryazev, M.V. & Pilipenko, O.V. Drawing of two-layer axisymmetric anisotropic components with wall thinning. Russ. Engin. Res. 37, 110–116 (2017). https://doi.org/10.3103/S1068798X17020186
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17020186