Abstract
The influence of various abrasive materials on the polishing of lithium-niobate single crystals is studied experimentally. In the analysis of the polishing tool, the tool life, the productivity, and the quality of the machined surface are taken into account.
Similar content being viewed by others
References
Kang, J. and Hadfield, M., Examination of the material removal mechanisms during the lapping process of advanced ceramic rolling elements, Wear, 2005, vol. 258, nos. 1–4, pp. 2–12.
Matrenin, S.V. and Slosman, A.I., Tekhnicheskaya keramika: uchebnoe posobie (Technical Ceramics: Manual), Tomsk: Tomsk. Politekh. Univ., 2004.
Vinokurov, V.M., Issledovanie protsessa polirovki stekla (Analysis of Glass Polishing Process), Moscow: Mashinostroenie, 1967.
Kim, J.-D. and Choi, M.-S., A study on the optimization of the cylindrical lapping process for engineering fine-ceramics (Al2O3) by the statistical design method., J. Mater. Process. Technol., 1995, vol. 52, pp. 368–385.
Khanov, A.M., Muratov, K.R., and Gashev, E.A., Influence of type of abrasive and contact pressure on ceramic finishing, Vestn. Yuzh.-Ural. Gos. Univ., Ser.: Mashinostr., 2015, vol. 15, no. 1, pp. 47–53.
Ardamatskii, A.L., Almaznaya obrabotka opticheskikh detalei (Diamond Treatment of Optic Parts), Leningrad: Mashinostroenie, 1978.
Formoobrazovanie opticheskikh poverkhnostei (Formation of Optic Surfaces), Kumanin, K.G., Ed., Moscow: Oborongiz, 1962.
Spravochnik optika-tekhnologa (Handbook of Optic Technologist), Okatov, M.A., Ed., St. Petersburg: Politekhnika, 2004.
Artemov, A.S., Polishing nanodiamonds, Phys. Solid State, 2004, vol. 46, no. 4, pp. 687–695.
Nekrasov, V.P., USSR Inventor’s Certificate no. 1685686, 1991.
Kachalov, N.N., Tekhnologiya shlifovki i polirovki stekla (The Technology of Grinding and Polishing of Glass), Moscow: Akad. Nauk SSSR, 1953.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © K.R. Muratov, E.A. Gashev, L.D. Sirotenko, 2016, published in STIN, 2016, No. 5, pp. 36–40.
About this article
Cite this article
Muratov, K.R., Gashev, E.A. & Sirotenko, L.D. Polishing tool for optical materials. Russ. Engin. Res. 36, 985–989 (2016). https://doi.org/10.3103/S1068798X16110150
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16110150