Abstract
A machine-tool system for active monitoring by vibrocontact measurement is proposed. This equipment increases the machining precision and productivity and also the technological margin of precision.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Sobolev, M.P. and Etingof, M.I., Avtomaticheskii razmernyi kontrol’ na metallorezhushchikh stankakh (Automatic Dimension Control on Metal Cutting Machines), Smolensk: Oikumena, 2005.
Trompet, G.M., Metody rascheta uslovii ekspluotatsii sistem upravlyayushchego kontrolya. Monografiya (Methods for Calculation of Operation Conditions of Automatic control Systems: Monograph), Yekaterinburg: Ural. Gos. Tekh. Univ., 2010.
Aleksandrov, V.A. and Trompet, G.M., Tekhnologicheskie i metrologicheskie vozmozhnosti stanochnogo oborudovaniya aktivnogo kontrolya v seriinom proizvodstve (Technological and Metrological Capacities of In-Process Control Machines in Mass Production Industry: Monograph), Yekaterinburg: Ural. Gos. Agrar. Univ., 2014.
Trompet, G.M., Aleksandrov, V.A., and Kirsanov, Yu.A., RF Patent 90892, 2010.
Targ, S.M., Kratkii kurs teoreticheskoi mekhaniki (Brief Course of Theoretical Mechanics), Moscow: Vysshaya Shkola, 1986.
Babankov, I.M., Teoriya kolebanii (Theory of Oscillations), Moscow: Nauka, 1986.
Pfeiffer, P., Mechanik der Elastischen Körper, Berlin: Springer-Verlag, 1928.
Trompet, G.M. and Krasil’nikov, A.Ya., Vibratory contact transducer for the metric module of multipurpose machine tools, Russ. Eng. Res., 2007, vol. 27, no. 5, pp. 296–298.
Trompet, G.M. and Kharitonov, V.M., Aktivnyi kontrol’ razmerov detalei s preryvistymi poverkhnostyami (In-Process Control of Dimensions of Parts with Intermitted Surfaces), Available from VINITI, 1984, no. 3, pp. 103–111.
Biryukov, B.N., Kuvshinskii, V.V., and Trompet, G.M., Ispol’zovanie priborov aktivnogo kontrolya dlya optimizatsii protsessov obrabotki detalei s bol’shoi preryvistost’yu (The Use of In-Process Control for Optimization of Treatment of Parts with Extended Intermitted Surfaces), Available from VINITI, 1978, no. 4, pp. 141–144.
Volosov, S.S. and Ped’, E.I., Pribory dlya avtomaticheskogo kontrolya v mashinostroenii (Devices for In-Process Control in Machine Engineering), Moscow: Izd. Standartov, 1975.
Kuvshinskii, V.V., Chistovaya abrazivnaya obrabotka (Final Abrasive Treatment), Sverdlovsk: Ural. Politekh. Inst., 1970.
Trompet, G.M., Accuracy and efficiency improvement of mechanic treatment of hard and uncontrolled parts using vibrocontact principle of measurement, VII Mezhd. simp. po fundamental’nym i prikladnym problemam nauki, Nepryakhino, Rossiya (VII Int. Symp. on Fundamental and Applied Problems in Science, Nepryakhino, Russia), Moscow: Ross. Akad. Nauk, 2012, vol. 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Aleksandrov, A.N. Vilkov, Yu.V. Vilkova, G.M. Trompet, 2016, published in Vestnik Mashinostroeniya, 2016, No. 8, pp. 74–77.
About this article
Cite this article
Aleksandrov, V.A., Vilkov, A.N., Vilkova, Y.V. et al. Active monitoring systems in the machining of discontinuous surfaces. Russ. Engin. Res. 36, 926–929 (2016). https://doi.org/10.3103/S1068798X16110034
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16110034