Abstract
The shaping of helical chip channels in barrel-shaped mills with sharp teeth by the track method (the tangential-trajectory method) is described. Iterative computer shaping is considered. The corresponding formulas are derived, and examples of computer operation are presented, with visualization of the results. Graphical images of the calculated mill end cross sections are shown.
Similar content being viewed by others
References
Lyukshin, V.S., Teoriya vintovykh poverkhnostei v proektirovanii rezhushchikh instrumentov (The Theory of Spiral Surfaces in the Design of Cutting Tools), Moscow: Mashinostroenie, 1967.
Shchegol’kov, N.N., Shaping quasi-helical surfaces by means of disk tools, Russ. Eng. Res., 2013, vol. 33, no. 6, pp. 367–371.
Shchegol’kov, N.N., The profiling algorithm of chip grooves of taper flute cutters with helical teeth, Vestn. Mashinostr., 2013, no. 8, pp. 66–73.
Shchegol’kov, N.N., Interactive profiling of chip channels in cutting tools, Russ. Eng. Res., 2014, vol. 34, no. 5, pp. 334–339.
Protas’ev, V.B. and Istotskii, V.V., Proektirovanie fasonnykh instrumentov, izgotovlyaemykh s ispol’zovaniem shlifoval’no-zatochnykh stankov s ChPU (Design of Shaped Tools Produced Using CNC Grinding-Sharpening Machines), Moscow: Infra-M, 2011.
Lashnev, S.I. and Yulikov, M.I., Raschet i konstruirovanie metallorezhushchikh instrumentov s primeneniem EVM (Automated Calculation and Design of Metal Cutting Tools), Moscow: Mashinostroenie. 1975.
Shchegol’kov, N.N., Iterative profiling of cutting disks for the machining of helical surfaces by the normal method, Stanki Instrum., 1991, no. 6, pp. 26–28.
Kudevitskii, Ya.V., Fasonnye frezy (Shaped Cutters), Leningrad: Mashinostroenie, 1978.
Druzhinskii, I.A., Slozhnye poverkhnosti: matematicheskoe opisanie i tekhnologicheskoe obespechenie. Spravochnik (Complicated Surfaces: Mathematical Description and Technological Support. Handbook), Leningrad: Mashinostroenie, 1985.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.N. Shchegol’kov, 2016, published in STIN, 2016, No. 4, pp. 7–13.
About this article
Cite this article
Shchegol’kov, N.N. Shaping of noncylindrical helical chip-channel surfaces in complex mills. Russ. Engin. Res. 36, 851–856 (2016). https://doi.org/10.3103/S1068798X16100178
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16100178