Abstract
Practical proposals are made regarding the hot shaping of conical housings with stepped internal structure, in the viscoplastic state. The pressure in the operations, the damage to the material, the degree of shaping, and the critical pressure are estimated. Test results are presented.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Malinin, N.N., Polzuchest’ v obrabotke metallov (Creep in the Metal Treatment), Moscow: Mashinostroenie, 1986.
Kolmogorov, V.L., Mekhanika obrabotki metallov davleniem (Mechanics of Metal Treatment by Pressure), Moscow: Metallurgiya, 1986.
Yakovlev, S.S., Yakovlev, S.P., and Chudin, V.N., Izotermicheskoe formoizmenenie anizotropnykh materialov zhestkikh instrumentov v rezhime kratkovremennoi polzuchesti (Isothermal Forming of Anisotropic Materials of Rigid Instruments in the Short Creep Mode), Moscow: Mashinostroenie, 2009.
Romanov, K.I., Mekhanika goryachego formoizmeneniya metallov (The Mechanics of the Hot Forming of Metals), Moscow: Mashinostroenie, 1993.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.N. Chudin, 2016, published in Vestnik Mashinostroeniya, 2016, No. 7, pp. 3–5.
About this article
Cite this article
Chudin, V.N. Hot stamping of conical housings with stepped internal structure. Russ. Engin. Res. 36, 797–799 (2016). https://doi.org/10.3103/S1068798X16100063
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16100063