Abstract
Research on the wear of a PTFE–18Kh2N4MA steel pair indicates that the heat-distribution coefficient calculated from the Sharron formula for the polymer is too low. The transfer of polymer to the steel must be taken into account in determining that coefficient.
Similar content being viewed by others
References
Chichinadze, A.V., Polimery v uzlakh treniya mashin i priborov: spravochnik (Polymers in the Friction Units of Machines and Devices: Handbook), Moscow: Mashinostroenie, 1988.
Chichinadze, A.V., Berlinger, E.M., Braun, E.D., et al., Trenie, iznos i smazka (tribologiya i tribotekhnika) (Friction, Wear, and Lubrication (Tribology and Tribotechnics)), Chichinadze, A.V., Ed., Moscow: Mashinostroenie, 2003.
Kong, D., Physical models of polytetrafluoroethylene and its composites, Wear, 1991, vol. 147, pp. 9–24.
Bahadur, S., The development of transfer layers and their role in polymer tribology, Wear, 2000, vol. 245, nos. 1–2, pp. 92–99.
Kozyrev, Yu.P. and Sedakova, E.B., Method for determining the allowable loads in friction with the use of an empirical wear law, Russ. Eng. Res., 2007, vol. 27, no. 6, pp. 350–353.
Amosov, A.P., Elementary Tegako physical models of friction, Izv. Samar. Nauch. Tsentra, Ross. Akad. Nauk, 2011, vol. 13, no. 4 (3), pp. 656–662.
Dul’vev, G.N., Teplo-massoobmen v radioelektronnoi apparature (Heat and Mass Transfer in Electronics), Moscow: Vysshaya Shkola, 1984.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.B. Sedakova, Yu.P. Kozyrev, 2016, published in Vestnik Mashinostroeniya, 2016, No. 6, pp. 47–50.
About this article
Cite this article
Sedakova, E.B., Kozyrev, Y.P. Thermal distribution in the PTFE–steel frictional pair. Russ. Engin. Res. 36, 727–730 (2016). https://doi.org/10.3103/S1068798X16090227
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16090227