Abstract
A method of increasing the life of highly loaded compression springs is proposed. The stress–strain state of the spring in plastic hardening is investigated. The required hardening load and geometric parameters of the spring are determined.
Similar content being viewed by others
References
Lavrinenko, Yu.A., Belkov, E.G., and Fadeev, V.V., Uprochnenie pruzhin (Strength of the Springs), Ufa: Biznes-Partner, 2002.
Zemlyanushnova, N.Yu., Tebenko, Yu.M., and Zemlyanushnov, N.A., Vosstanovlenie vintovykh tsilindricheskikh pruzhin szhatiya: Monografiya (Reparation of Screw Cylindrical Compression Springs: Monograph), Stavropol: Argus, 2012.
Tebenko, Yu.M., Problemy proizvodstva vysokoskorostnykh pruzhin i puti ikh resheniya: Monografiya (Production Problems of the High-Speed Springs and Their Solution: Monograph), Stavropol: Mir Dannykh, 2007.
Rakhshtadt, A.G., Pruzhinnye stali i splavy (Spring Steels and Alloys), Moscow: Metallurgiya, 1982.
Zemlyanushnov, N.A., Tebenko, Yu.M., and Zemlyanushnova, N.Yu., RF Patent 2464119, Byull. Izobret., 2012, no. 29.
Tebenko, Yu.M., Zemlyanushnova, N.Yu., and Zemlyanushnov, N.A., RF Patent 2457917, Byull. Izobret., 2012, no. 22.
Tebenko, Yu.M., Zemlyanushnova, N.Yu., and Zemlyanushnov, N.A., RF Patent 2481914, Byull. Izobret., 2012, no. 14.
Zemlyanushnova, N.Yu., Raschet vintovykh tsilindricheskikh pruzhin szhatiya pri kontaktnom zanevolivanii: Monografiya (Calculation of Screw Cylindrical Compression Springs at the Contact Predeformation: Monograph), Stavropol: Argus, 2008.
Ponomarev, S.D., Biderman, V.L., Likharev, K.K., et al., Raschety na prochnost’ v mashinostroenie (Calculations of Strength in Machine Engineering), Moscow: Mashgiz, 1958, vol. 2.
Ponomarev, S.D., Pruzhiny, ikh raschet i konstruirovanie (Calculation and Design of Springs), Moscow: Mashgiz, 1954.
Ponomarev, S.D., Plastoelestic calculations related to cold coiling of cylindrical springs, Tr. Mosk. Aviats. Inst., 1952, no. 17, pp. 10–25.
Ponomarev, S.D., Substantiation of the sizes of elastic core in predeformation springs, Izv. Vyssh. Ucheb. Zaved., Mashinostr., 1974, no. 10, pp. 24–27.
Aleksandrov, A.V., Potapov, V.D., and Derzhavin, B.P., Soprotivlenie materialov (Resistance of Materials), Moscow: Vysshaya Shkola, 2003.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.Yu. Zemlyanushnova, A.A. Porokhin, N.A. Zemlyanushnov, 2016, published in Vestnik Mashinostroeniya, 2016, No. 4, pp. 48–52.
About this article
Cite this article
Zemlyanushnova, N.Y., Porokhin, A.A. & Zemlyanushnov, N.A. Stress–strain state of the valve spring in an auto engine during plastic hardening. Russ. Engin. Res. 36, 535–540 (2016). https://doi.org/10.3103/S1068798X16070194
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16070194