Abstract
By kinematic analysis of a planetary roller screw and analysis of the relative amplitudes and phase shifts of the harmonics of its kinematic error as a function of their relative frequencies, additional requirements may be imposed on the manufacture and operation of the screw components so as to reduce the kinematic error and increase the precision.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Kozyrev, V.V., Konstruktsii rolikovintovykh peredach i metodika ikh proektirovanie: Uch. posobie (Design of Roller-Screw Transmissions: A Textbook), Vladimir: Vladimir. Gos. Univ., 2004.
Morozov, V.V. and Zhdanov, A.V., New aspects of the planetary roller-screw mechanism classification, WIT Trans. Eng. Sci. (Mech. Electrical Eng.), 2014, vol. 96, pp. 951–957. http://wwwwitpresscom
Kozyrev, V.V., Filimonov, V.N., Krylov, A.V., and Fedotov, O.V., Mechatronic modules with high resolution, Mater. desyatogo yubileinogo foruma “Vysokie tekhnologii XXI veka” (Proc. Tenth Jubilee Forum “Nanotechnologies in 21st Century”), Moscow: MaVR, 2009, pp. 625–629.
Ryabov, K.V., Fedotov, O.V., and Filimonov, V.N., Development and research of actuator for radiotelescope with active reflector, Vestn. Mashinostr., 2014, no. 6, pp. 14–20.
Kirillov, A.V., Fedotov, O.V., and Filimonov, V.N., Two-axis scanning table with electromechanical actuators based on planetary roller-screw drives for nanotechnological equipment, Vestn. Mashinostr., 2014, no. 8, pp. 22–28.
Morozov, V.V. and Zhdanov, A.V., Kinematic accuracy of roller-screw mechanisms, Vestn. Mashinostr., 2015, no. 3, pp. 19–25.
Zhdanov, A.V., Stepen’kin, A.V., and Shtykh, D.V., Assessment of quality of moving of output unit of the roller-screw mechanism, Fundam. Issled., 2013, no. 1, part 2, pp. 379–383.
Mamaev, I.M., Morozov, V.V., Fedotov, O.V., and Filimonov, V.N., Precision of a roller screw actuator transmission for a radio telescope, Russ. Eng. Res., 2015, vol. 35, no. 12, pp. 919–923.
Shinakov, I.V. and Zhdanov, A.V., Maintenance of toothed in planetary roller-screw mechanism, Izv. Teul’sk. Gos. Univ., Ser. Tekh. Nauki, 2010, nos. 2–1, pp. 93–98.
Shinakov, I.V., Zhdanov, A.V., and Kuznetsova, S.V., Roller-screw mechanisms with additional gear engagement, Fund. Issled., 2012, no. 3, pp. 145–148.
Mamaev, I.M., Stepen’kin, A.V., Kruglov, A.V., and Morozov, V.V., Comparison of manufacturing methods for gear crowns and their influence on the performance of planetary roller screw mechanisms, Sovrem. Probl. Nauki Obraz., 2014, no. 6. http://www. science-education. ru/120-16226.
Zhdanov, A.V., Stepen’kin, A.V., and Shalamberidze, Z.P., Theoretical investigation of load distribution on thread turns screw-roll mechanisms, Nauchno-Tekh. Vestn. Povolzh., 2011, no. 2, pp. 87–90.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.M. Mamaev, V.V. Morozov, O.V. Fedotov, V.N. Filimonov, 2016, published in Vestnik Mashinostroeniya, 2016, No. 4, pp. 9–12.
About this article
Cite this article
Mamaev, I.M., Morozov, V.V., Fedotov, O.V. et al. Harmonic analysis of the kinematic error in a planetary roller screw. Russ. Engin. Res. 36, 515–519 (2016). https://doi.org/10.3103/S1068798X16070169
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16070169