Abstract
The internal abrasive machining of thermoprotective rubber coatings with constant retaining force on the grinding wheel is studied, theoretically and experimentally. A model of rubber failure in abrasive machining is proposed on the basis of the work of a single abrasive grain in contact with the machined surface. A relation is established between the components of the grinding force and the normal and tangential contact stresses at the working surfaces of a single grain of the wheel.
Similar content being viewed by others
References
Reznikov, A.N. and Reznikov, L.A., Teplovye protsessy v tekhnologicheskikh sistemakh (Thermal Processes in Technological Systems), Moscow: Mashinostroenie, 1990.
Reznikov, A.N., Teplofizika protsessov mekhanicheskoi obrabotki materialov (Thermal Physics of Mechanical Treatment of Materials), Moscow: Mashinostroenie, 1981.
Klishchenko, V.P., Andrakhimov, Yu.R., and Vadulina, N.V., The destruction of the rubber at different mechanical treatment, Neftegaz. Delo, 2013, no. 2, pp. 419–429.
Petrovskii, V.S., The methods to ensure the accuracy of mechanisms of textile machineries according to their functional purpose, Doctoral (Tech.) Dissertation, Kostroma, 2003.
Nikitin, S.P., Trofimov, E.O., Khanov, A.M., and Sirotenko, L.D., Effect of technological parameters of abrasive rubber coatings on heat-power characteristics in the area of contact interaction, Izv. Samar. Nauch. Tsentra, Ross. Akad. Nauk, 2014, vol. 16, no. 1 (2), pp. 466–471.
Demidov, S.P., Teoriya uprugosti (The Theory of Elasticity), Moscow: Vysshaya Shkola, 1979.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.M. Khanov, L.D. Sirotenko, L.P. Shingel’, E.O. Trofimov, 2015, published in STIN, 2015, No. 12, pp. 25–28.
About this article
Cite this article
Khanov, A.M., Sirotenko, L.D., Shingel’, L.P. et al. Internal grinding of thermoprotective rubber coatings. Russ. Engin. Res. 36, 599–602 (2016). https://doi.org/10.3103/S1068798X16070091
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16070091