Abstract
Analytical formulas are derived for the internal surface characteristics of a large cylindrical workpiece after treatment by an abrasive–air jet as a function of the machining conditions. A formula for the productivity is also presented.
Similar content being viewed by others
References
Ippolitova, A.A. and Iznairov, B.M., Increase of operational capacity of the stop devices in pipeline gates, Matem. Metody Tekh. Tekhnol., 2014, no. 13, pp. 172–176.
Tamarkin, M.A., Tishchenko, E.E., Korol’kov, Yu.V., and Rozhnenko, O.A., More effective centrifugalrotary machining in an abrasive medium, Russ. Eng. Res., 2009, vol. 29, no. 5, pp. 518–521.
Zverovshchikov, V.Z., Zverovshchikov, A.E., and Zverovshchikov, E.A., Increase of efficiency of volumetric centrifugal peening-strengthening processing of details in containers with planetary rotation, Uprochn. Tekhnol. Pokryt., 2007, no. 12, pp. 3–7.
Yashcheritsyn, P.I., Martynov, A.N., and Gridin, A.D., Finishnaya obrabotka detalei potokom svobodnogo abraziva (Finishing of the Parts by the Free Abrasive Flow), Minsk: Nauka i Tekhnika, 1978.
Provolotskii, A.E., Struino-abrazivnaya obrabotka detalei mashin (Liquid Blasting of the Machine Parts), Kiev: Tekhnika, 1989.
Pichko, A.S., Liquid blasting of the hole surfaces of cylindrical parts, Vestn. Mashinostr., 1978, no. 10, pp. 65–67.
Martynov, A.N., Osnovy metoda obrabotki detalei svobodnym abrazivom uplotnennym inertsionnymi silami (The Principles of Treatment of the Parts by Free Abrasive Sealed Internal Forces), Saratov: Saratov. Gos. Univ., 1981.
Kravchenko, I.N., The principles and selection of parameters characterizing the development degree of a surface after liquid blasting, Remont, Vosstanovlenie, Modernizatsiya, 2014, no. 7, pp. 46–48.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.V. Zakharov, L.V. Khudobin, N.I. Vetkasov, I.A. Sklyarov, A.V. Kochetkov, 2016, published in Vestnik Mashinostroeniya, 2016, No. 3, pp. 79–81.
About this article
Cite this article
Zakharov, O.V., Khudobin, L.V., Vetkasov, N.I. et al. Abrasive-jet machining of large hollow components. Russ. Engin. Res. 36, 469–471 (2016). https://doi.org/10.3103/S1068798X16060228
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16060228