Abstract
The limiting deformation in rotary drawing of anisotropic pipe blanks with wall thinning is studied theoretically. The maximum tensile stress at exit from the plastic deformation region is determined.
Similar content being viewed by others
References
Greditor, M.A., Davil’nye raboty i rotatsionnoe vydavlivanie (Spinning Operations and Rotary Extrusion), Moscow: Mashinostroenie, 1971.
Mogil’nyi, N.I., Rotatsionnaya vytyazhka obolochkovykh detalei na stankakh (Rotary Drawing of Shells on Machine Tools), Moscow: Mashinostroenie, 1983.
Kovka i shtampovka: Spravochnik: T. 4. Listovaya shtampovka (Forging and Stamping: A Handbook, Vol. 4: Sheet Stamping), Yakovlev, S.S., Ed., Moscow: Mashinostroenie, 2010.
Yakovlev, S.S., Tregubov, V.I., Pilipenko, O.V., and Remnev, K.S., Rotary drawing of axisymmetric shells with distribution of the deformation zone, Russ. Eng. Res., 2015, vol. 35, no. 4, pp. 270–276.
Yakovlev, S.S., Kukhar’, V.D., and Tregubov, V.I., Teoriya i tekhnologiya shtampovki anizotropnykh materialov (Theory and Technology of the Stamping of Anisotropic Materials), Yakovlev, S.S., Ed., Moscow: Mashinostroenie, 2012.
Kolmogorov, V.L., Mekhanika obrabotki metallov davleniem (Metal Pressuring Method), Yekaterinburg: Ural. Gos. Tekh. Univ., 2001.
Bogatov, A.A., Mekhanicheskie svoistva i modeli razrusheniya metallov (Mechanical Properties and Models of Metal Destruction), Yekaterinburg: Ural. Gos. Tekh. Univ., 2002.
Golenkov, V.A., Yakovlev, S.P., Golovin, S.A., et al., Teoriya obrabotki metallov davleniem: Uchebnik dlya vuzov (Theory of the Pressure Treatment of Metals: Manual for Higher Education Students), Golenkov, V.A. and Yakovlev, S.P., Eds., Moscow: Mashinostroenie, 2009.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.S. Yakovlev, V.I. Tregubov, E.V. Osipova, 2016, published in Vestnik Mashinostroeniya, 2016, No. 3, pp. 81–84.
About this article
Cite this article
Yakovlev, S.S., Tregubov, V.I. & Osipova, E.V. Limiting deformation in rotary drawing of anisotropic pipe blanks with wall thinning. Russ. Engin. Res. 36, 472–475 (2016). https://doi.org/10.3103/S1068798X16060204
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16060204