Abstract
The turning of Caprolon workpieces with irradiation by nanosecond electromagnetic pulses is proposed. This method softens the surface layer and so increases the cutting speed.
Similar content being viewed by others
References
Erenkov, O.Yu., Innovatsionnye tekhnologii mekhanicheskoi obrabotki polimernykh materilov rezaniem (Innovative Technologies of Mechanical Cutting of Polymeric Materials), Komsomolsk-on-Amur: Komsomolsk-on-Amur Gos. Tekh. Univ., 2014.
Erenkov, O.Yu., Tekhnologiya polucheniya i obrabotka rezaniem polimernykh kompozitsionnykh materialov (Production Technology and Cutting of Polymeric Composites), Komsomolsk-on-Amur: Komsomolskon-Amur Gos. Tekh. Univ., 2014.
Belkin, V.S., Bukharin, V.A., Dubrovin, V.K., et al., Nanosekundnye elektromagnitnye impul’sy i ikh primenenie (Nanosecond Electromagnetic Pulses and Their Implementation), Krymskii, V.V., Ed., Chelyabinsk: Yuzh.-Ural. Gos. Univ., 2001.
Kartashov, E.M., Tsoi, B., and Shevelev, V.V., Strukturno-statisticheskaya kinetika razrusheniya polimerov (Structural-Static Kinetics of Polymer Destruction), Moscow: Khimiya, 2002.
Shcherbina,D.V., Erenkov,O.Yu., Erenkov,S.O., and Bogachev,A.P., RF Patent 2494864.
Erenkov,O.Yu., Ri,H., Erenkov,S.O., Bogachev,A.P., and Ri,V.E., RF Patent 2503538.
Erenkov,O.Yu., Ri,H., Erenkov,S.O., Bogachev,A.P., and Ri,V.E., RF Patent 2518595.
Erenkov, O.Yu., Erenkov, S.O., and Radchenko, M.V., Experimental study of the effect of engineering system condition during turning polymer materials on machined surface roughness, Chem. Petrol. Eng., 2013, vol. 49, nos. 7–8, pp. 491–494.
Erenkov, O.Yu. and Ivakhnenko, A.G., Mathematical model of nonlinear oscillations and determination of the conditions of technological system instability during turning, Uch. Zap. Komsomol’sk.-na-Amure Gos.Tekh. Univ., Nauki Prirod. Tekhn., 2010, no. 1 (1), pp. 45–51.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.Yu. Erenkov, A.P. Bogachev, 2016, published in Vestnik Mashinostroeniya, 2016, No. 3, pp. 64–66.
About this article
Cite this article
Erenkov, O.Y., Bogachev, A.P. Turning of polymers with pulsed electromagnetic irradiation of the workpiece. Russ. Engin. Res. 36, 466–468 (2016). https://doi.org/10.3103/S1068798X16060095
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16060095