Abstract
The position of the skewing axis of a threaded joint under the action of a tipping torque is determined theoretically and experimentally. The position of this axis determines the load distribution in the screws.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Birger, I.A. and Iosilevich, G.B., Rez’bovye soedineniya (The Threaded Joints), Moscow: Mashinostroenie, 1973.
Murkin, S.V., Ivanov, A.S., and Ermolaev, M.M., Complex screw joint under the action of the separation force and a skew torque, Russ. Eng. Res., 2014, vol. 34, no. 7, pp. 429–432.
Ivanov A.S., Influence of contact pliability on the operation of a threaded joint subject to a rupture force and a tipping moment, Russ. Eng. Res., 2008, vol. 28, no. 11, pp. 1063–1069.
Nikiforov, V.V., Experimental groups of bolted joints with ring joint loaded with a bending moment, Vestn. Mashinostr., 1974, no. 5, pp. 28–30.
Sawa, B.T., Iwata, A., Kumano, H., et al., On the characteristics of bolted joints subjected to bending moment, Bull. JSME, 1986, vol. 29, no. 247, pp. 281–286.
Ivanov, A.S., Ermolaev, M.M., Kuralina, N.N., and Murkin, S.V., Deformation of frictional joints under the action of a compressive force and arbitrary torque, Russ. Eng. Res., 2013, vol. 33, no. 10, pp. 559–561.
Ryzhov, E.V., Kontaktnaya zhestkost’ detalei mashin (Contact Rigidity of the Vehicle Units), Moscow: Mashinostroenie, 1966.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.V. Murkin, A.S. Ivanov, M.M. Ermolaev, S.K. Rudnev, M.S. Kuts, 2015, published in Vestnik Mashinostroeniya, 2015, No. 10, pp. 31–34.
About this article
Cite this article
Murkin, S.V., Ivanov, A.S., Ermolaev, M.M. et al. Position of the skew axis of a threaded joint under the action of a tipping torque. Russ. Engin. Res. 36, 16–19 (2016). https://doi.org/10.3103/S1068798X16010159
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16010159