Abstract
A method is proposed for assessing the influence of dynamic processes in the elastic metal-cutting machine on the resulting surface undulation and roughness. Algorithms for successive parameter calculation are outlined.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Grigor’ev, S.N., Zavgorodnii, V.I., and Maslov, A.R., Ensuring specified product quality in high-speed machining, Vestn. MGTU Stankin, 2014, no. 1(28), pp. 38–40.
Gribkov, A.A., Grigor’ev, S.N., and Zakharchenko, D.V., Developments in machine-tool design in Russia and abroad, Vestn. MGTU Stankin, 2012, no. 1(19), pp. 8–11.
Bushuev, V.V. and Sabirov, F.S., Global trends in machine-tool design, Vestn. MGTU Stankin, 2010, no. 1(9), pp. 24–30.
Idrisova, Yu.V., Kudoyarov, R.G., and Fetsak, S.I., Simulating the relative vibrations of the working elements in metalworking machines, Vestn. UGATU, 2013, vol. 17, no. 8(61), pp. 90–96.
Kozochkin, M.P. and Sabirov, F.S., Real-time diagnostics in metalworking, Vestn. MGTU Stankin, 2008, no. 3, pp. 14–18.
Khomyakov, V.S., Kochinev, N.A., and Sabirov, F.S., Dynamic characteristics of spindles, Vestn. MGTU Stankin, 2008, no. 4, pp. 15–22.
Maslov, A.R., Measurement of the roughness parameters of a treated surface in turning parts fabricated from heat-resistant alloys, Meas. Techn., 2012, vol. 55, pp. 648–653.
Bushuev, V.V. and Molodtsov, V.V., Role of the machine tool’s kinematic structure in ensuring machining precision, Russ. Eng. Res., 2010, vol. 30, no. 10, pp. 1053–1059.
Sankin, Yu.N., Dinamika nesushchikh sistem metallorezhushchik stankov (Dynamics of the Supporting Systems in Metal-Cutting Machines), Moscow: Mashinostroenie, 1986.
Asanov, R.E., Kosov, M.G., and Kuznetsov, A.P., Assessment of mechatronic-module designs, Vestn. MGTU Stankin, 2013, no. 1(24), pp. 60–66.
Asanov, R.E., Kuznetsov, A.P., and Kosov, M.G., Quality considerations in mechatronic-module design, Vestn. MGTU Stankin, 2012, no. 4(23), pp. 26–30.
Kudoyarov, R.G., Durko, E.M., and Ivanov, D.V., Design of mechatronic machine-tool equipment, Russ. Eng. Res., 2008, vol. 28, no. 1, pp. 74–78.
Idrisova, Yu.V., Kudoyarov, R.G., and Fetsak, S.I., Diagnostika privodov metallobrabatyvayushchikh stankov s avtomaticheskim upravleniem (Diagnostics of Drives in Automatically Controlled Metalworking Machines), Ufa: UGATU, 2013.
Maslov, A.R. and Molodtsov, V.V., Simulation of the vibrations of a system for hole reaming, Vestn. MGTU Stankin, 2014, no. 4(31), pp. 196–199.
Zavgorodnii, V.I., Kozochkin, M.P., Maslov, A.R., and Sabirov, F.S., Influence of the dynamic characteristics of the tool and the blank on the vibroacoustic monitoring of cutting, Russ. Eng. Res., 2010, vol. 30, no. 9, pp. 939–943.
Maslov, A.R., More precise milling of titanium alloy polyhedra, Russ. Eng. Res., 2015, vol. 35, no. 2, pp. 113–115.
Grigoriev, S.N., Kutin, A.A., Turkin, M.V., Modelling complex production processes in aerospace industry based on dimensional analysis, Proc. CIRP, 2013, vol. 7, pp. 473–478.
Reshetov, D.N. and Portman, V.T., Tochnost’ metallorezhushchikh stankov (Precision of Metal-Cutting Machines), Moscow: Mashinostroenie, 1986.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.V. Idrisova, R.G. Kudoyarov, S.I. Fetsak, A.R. Maslov, 2015, published in Vestnik Mashinostroeniya, 2015, No. 9, pp. 10–14.
About this article
Cite this article
Idrisova, Y.V., Kudoyarov, R.G., Fetsak, S.I. et al. Influence of dynamic processes on the machined surface. Russ. Engin. Res. 35, 887–891 (2015). https://doi.org/10.3103/S1068798X15120096
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15120096