Abstract
The use of cut-layer simulation to determine the cutting forces is considered.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Grechishnikov, V.A., More Efficient Design and Use of Machining Tools on the Basis of Simulation, Doctoral Dissertation, Moscow, 1989.
Grechishnikov, V.A. and Pivkin, P.M., Cutting heads for trimming and cutting channels with a conical generatrix and end channels in parts of different configuration, Vestn. MGTU Stankin, 2014, no. 2(29), pp. 50–56.
Isaev, A.V. and Grechishnikov, V.A., Using straightedge cutting plates in machining curvilinear profiles, Russ. Eng. Res., 2010, vol. 30, no. 4, pp. 413–415.
Kosarev, D.V., Grechishnikov, V.A., and Kosarev, V.A., Reducing the vibration in cutting internal slots by superhard threaded mills, Russ. Eng. Res., 2010, vol. 30, no. 9, pp. 948–950.
Grechishnikov, V.A. and Isaev, A.V., Determining the position of cutting plates along a helical chip channel in a complex composite mill, Vestn. MGTU Stankin, 2014, no. 2(29), pp. 34–39.
Grechishnikov, V.A., Domnin, P.V., Kosarev, V.A., et al., Shaping complex cutting tools, Russ. Eng. Res., 2014, vol. 34, no. 7, pp. 461–465.
Isaev, A.V. Design of complex composite mills with round replaceable polyhedral plates at a helical surface, Vestn. MGTU Stankin, 2011, no. 1, pp. 61–66.
Grechishnikov, V.A., Kosarev, V.A., Dymov, M.S., and Kosarev, D.V., Determining the initial tool surface in machining internal threads by a tool with planetary motion, Russ. Eng. Res., 2011, vol. 31, no. 6, pp. 614–618.
Grechishnikov, V.A. and Pivkin, P.M., Simulation of the surface roughness of the part as a function of the cutter parameters and the shape of the part’s generatrix in machining, Vestn. MGTU Stankin, 2014, no. 4(31), pp. 59–66.
Isaev, A.V., Design of complex composite mills with round replaceable polyhedral plates at a helical surface, Vestn. MGTU Stankin, 2011, no. 1, pp. 61–66.
Grechishnikov, V.A. and Isaev, A.V., Cut layer in planetary internal thread milling, Vestn. MGTU Stankin, 2012, vol. 2, no. 1, pp. 32–35.
Kosarev, V.A., Cut layer in planetary internal thread milling, Vestn. MGTU Stankin, 2012, vol. 2, no. 1, pp. 32–35.
Petukhov, Yu.E. and Domnin, P.V., Precision of profiling in the machining of a screw surface, Russ. Eng. Res., 2011, vol. 31, no. 10, pp. 1013–1016.
Petukhov, Yu.E., Kolesov, N.V., and Yurasov, S.Yu., Geometric shaping in cutting, Russ. Eng. Res., 2014, vol. 34, no. 6, pp. 374–380.
Petukhov, Yu.E. and Vodovozov, A.A., Curvilinear cutting edge of a helical bit with uniform life, Russ. Eng. Res., 2014, vol. 34, no. 10, pp. 645–648.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Grechishnikov, P.M. Pivkin, A.V. Isaev, 2015, published in Vestnik Mashinostroeniya, 2015, No. 9, pp. 15–18.
About this article
Cite this article
Grechishnikov, V.A., Pivkin, P.M. & Isaev, A.V. Improving the precision of complex parts in external turning. Russ. Engin. Res. 35, 892–895 (2015). https://doi.org/10.3103/S1068798X15120084
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15120084