Abstract
Design principles are developed for wraparound tools with spherical deforming elements used in the hybrid deforming and cutting of long blanks.
Similar content being viewed by others
References
Shchedrin, A.V., Bekaev, A.A., and Sumele, G.K., Influence of the blank’s properties on the hybrid drawing of long profiles, Russ. Eng. Res., 2010, vol. 30, no. 11, pp. 1137–1140.
Shchedrin, A.V., Bekaev, A.A., and Sumele, G.K., Interaction of spherical deforming elements with the cylindrical blank in hybrid drawing, Russ. Eng. Res., 2010, vol. 30, no. 12, pp. 1238–1241.
Ul’yanov, V.V., Shchedrin, A.V., Skoromnov, V.M., et al., Improving the combined reduction and broaching methods, Metallurg, 2005, no. 10, pp. 66–69.
Gorshkov, B.T., Tatin, I.A., Chernitsyn, V.S., et al., Spravochnik po otdelke sortovogo prokata (Handbook on the Finishing of Rolled Bar), Moscow: Metallurgiya, 1978.
Shchedrin, A.V., Gavrilov, S.A., Erokhin, V.V., et al., Improvement of hybrid machining by a tool with regular surface microrelief on the basis of coating lubricants, Uprochn. Tekhnol. Pokryt., 2011, no. 8, pp. 21–25.
Gavrilov, S.A. and Zinin, M.A., Synthesis of coating lubricants to minimize the frictional wear in extreme conditions, Zagotov. Proizv. Mashinostr., 2013, no. 2, pp. 29–33.
Shchedrin, A.V., Ul’yanov, V.V., Bekaev, A.A., et al., Systematic design of competitive technological components on tribological principles, Remont, Vosstan., Modern., 2009, no. 4, pp. 15–20.
Yaroslavtsev, V.M., Rezanie s operezhayushchim plasticheskim deformirovaniem. Ucheb. posovie po kursu Perspectivnye tekhnologii renovatsii (Cutting with Preceding Plastic Deformation: Textbook on Promising Repair Technologies), Moscow: MGTU im. Baumana, 2010.
Aleksandrov, A.V. and Potapov, V.D., Osnovy teorii uprugosti i plastichnosti (Fundamentals of Elasticity and Plasticity Theory), Moscow: Vysshaya Shkola, 1990.
Osiko, V.V. and Lomonova, E.E., Polyfunctional materials based on nanostructured crystals of partially stabilized zirconium dioxide, Vestn. RAN, 2012, vol. 82, no. 9, pp. 790–800.
Shchedrin, A.V., Bekaev, A.A., Skoromnov, V.M., et al., Application of the Bauschinger effect in hybrid drawing, Avto. Prom., 2012, no. 6, pp. 35–37.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Kurenkov, I.M. Sinev, S.A. Gavrilov, A.V. Shchedrin, 2015, published in Vestnik Mashinostroeniya, 2015, No. 8, pp. 59–61.
About this article
Cite this article
Kurenkov, A.S., Sinev, I.M., Gavrilov, S.A. et al. Design of tool with spherical deforming elements for machining long blanks. Russ. Engin. Res. 35, 835–837 (2015). https://doi.org/10.3103/S1068798X15110118
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15110118