Abstract
The influence of rolling on the performance of powder-alloy parts—in particular, on their surface hardness—is investigated
Similar content being viewed by others
References
Dmitriev, A.M., Grigor’ev, S.N., Korobova, N.V., and Stupnikov, V.P., Quality of blanks based on iron powder produced by shaping and current-pulse sintering, Metallov. Term. Obrab. Met., 2012, no. 1, pp. 18–22.
Smolentsev, V.P., Smolentsev, E.V., and Grigor’ev, S.N., Competitive technology and equipment for electrical machining, Spravochn., Inzh. Zh., 2011, no. 5, pp. 43–46.
Volosova, M.A., Grigor’ev, S.N., and Mogilevskii, A.M., Effectiveness of nanocoating application on hard-alloy end mills, Vestn. MGTU Stankin, 2011, vol. 2, no. 4, pp. 24–30.
Grigor’ev, S.N., Mel’nik, Yu.A., Metel’, A.S., et al., Nitriding of cutting tools in plasma obtained by gas ionization using a beam of fast neutral nitrogen molecules, Vestn. MGTU Stankin, 2010, no. 4, pp. 47–54.
Kropotkina, E.Yu., Quality control of flexible components by surface plastic deformation, Vestn. MGTU Stankin, 2011, no. 2, pp. 25–28.
Kropotkina, E.Yu., Donskov, A.S., and Plotnikov, A.F., Influence of asymmetric hardening by surface plastic deformation on the performance of parts, Tekhnol. Mashinostr., 2011, no. 10, pp. 21–24.
Grigor’ev, S.N. and Kropotkina, E.Yu., Quality control of the surface layer with specified hardening, Uprochn. Tekhnol. Pokryt., 2012, no. 9, pp. 8–12.
Kropotkina, E.Yu., Influence of the rolling parameters on the surface roughness, Uprochn. Tekhnol. Pokryt., 2012, no. 1, pp. 6–9.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.Yu. Kropotkina, V.K. Flegentov, 2015, published in Vestnik Mashinostroeniya, 2015, No. 8, pp. 35–36.
About this article
Cite this article
Kropotkina, E.Y., Flegentov, V.K. Hardening of powder-alloy components by rolling. Russ. Engin. Res. 35, 822–823 (2015). https://doi.org/10.3103/S1068798X15110106
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15110106