Abstract
A technique which constitutes the basis of tooling support in metalworking industries for machining all types of face grooves and applied for designing a set of cutters is described in this paper.
Similar content being viewed by others
References
Grigor’ev, S.N., Grechishnikov, V.A., and Maslov, A.R., Instrumental’nye sistemy integrirovannykh mashinostroitel’nykh proizvodstv (Tool Systems in Integrated Manufacturing Processes), Moscow: IGO, 2013.
Grigor’ev, S.N., Grechishnikov, V.A., and Maslov, A.R., Instrumental’noe obespechenie integrirovannykh mashinostroitel’nykh proizvodstv (Tool Provision in Integrated Manufacturing Processes), Moscow: FGBOU VPO MGTU Stankin, 2014.
Grechishnikov, V.A. and Pivkin, P.M., Cutting head for parting, machining grooves with conical generatrix and face grooving parts of various shape, Vestn. MGTU Stankin, 2014, no. 2(29), pp. 50–56.
Grechishnikov, V.A., Domnin, P.V., Kosarev, V.A., et al., Shaping by means of complex cutting tools, Russ. Eng. Res., 2014, vol. 34, no. 7, pp. 461–465.
Grechishnikov, V.A. and Pivkin, P.M., Simulation of the surface roughness of parts as a function of the tool parameters and the shape of the part’s generatrix in machining, Vestn. MGTU Stankin, 2014, no. 4(31), pp. 59–66.
Grechishnikov, V.A., Romanov, V.B., Ryabov, E.A., et al., Design of chisel profile with any specified geometric parameters, Vestn. MGTU Stankin, 2012, no. 4(23), pp. 15–17.
Russian patent 120594.
Petukhov, Yu.E. and Domnin, P.V., Shaping of complex helical surfaces by a standard straight-edged tool, Vestn. MGTU Stankin, 2011, no. 3, pp. 102–106.
Petukhov, Yu.E. and Vodovozov, A.A., Model of the curvilinear cutting edge of a high-strength helical bit, Vestn. MGTU Stankin, 2012, no. 3, pp. 28–32.
Petukhov, Yu.E., Kolesov, N.V., and Yurasov, S.Yu., Geometric shaping in cutting, Russ. Eng. Res., 2014, vol. 34, no. 6, pp. 374–380.
Petukhov, Yu.E. and Vodovozov, A.A., Curvilinear cutting edge of a helical bit with uniform life, Russ. Eng. Res., 2014, vol. 34, no. 10, pp. 645–648.
Petukhov, Yu.E. and Domnin, P.V., Shaping precision in machining a screw surface, Russ. Eng. Res., 2011, vol. 31, no. 10, pp. 1013–1015.
Grechishnikov, V.A., Kosarev, V.A., Dymov, M.S., and Kosarev, D.V., Russ. Eng. Res., 2011, vol. 31, no. 6, pp. 614–618.
Kosarev, D.V., Grechishnikov, V.A., and Kosarev, V.A., Reducing the vibration when cutting internal threads by mills equipped with replaceable hard-alloy plates, Russ. Eng. Res., 2010, vol. 30, no. 9, pp. 948–950.
Isaev, A.V. and Grechishnikov, V.A., Machining curvilinear sections of means of cutting plates with a linear edge, Russ. Eng. Res., 2010, vol. 30, no. 4, pp. 413–417.
Grechishnikov, V.A. and Isaev, A.V., Determining the position of cutting plates along a helical chip channel in a complex composite mill, Vestn. MGTU Stankin, 2014, no. 2(29), pp. 34–39.
Grechishnikov, V.A. and Kosarev, V.A., Models for tool design with planetary motion in machining internal surfaces, Vestn. MGTU Stankin, 2012, vol. 2, no. 1, pp. 8–10.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Grechishnikov, A.R. Maslov, P.M. Pivkin, 2015, published in Vestnik Mashinostroeniya, 2015, No. 8, pp. 16–19.
About this article
Cite this article
Grechishnikov, V.A., Maslov, A.R. & Pivkin, P.M. Tool system for face grooving using CNC machines. Russ. Engin. Res. 35, 814–817 (2015). https://doi.org/10.3103/S1068798X15110052
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15110052