Abstract
The geometry of a diamond cutter based on a tetrahedral pyramid for splitting sheet blanks is analyzed. An algorithm for cutter design is formulated.
Similar content being viewed by others
References
Mostofa, M.G., Park, C.I., and Park, S.S., AFM probe based nanomechanical scribing of soda-lime glass, J. Manuf. Proc., 2013, vol. 15, pp. 625–634.
Fadeyev, V., Sadrozinski, H.F.-W., Elya, S., et al., Scribe-cleave-passivate (SCP) slim edge technology for silicon sensors, Nucl. Instrum. Meth. Phys. Res. A: Accel., Spectrom., Detect., Assoc. Equip., 2013, vol. 731, pp. 260–265.
Ogorodnikov, A.I., Ogorodnikova, O.M., and Tikhonov, I.N., Simulation of defect zones in scribed silicon wafers, Mater. Sci. Eng.: IP Conf. Ser., 2010, vol. 15, AN 012046.
Rastorguev, G.A., Creating channels in machine parts, Vestn. Mashinostr., 2013, no. 5, pp. 50–55.
Zhukov, Yu.N., Mekhanizm obrazovaniya defektov poverkhnosti pri lezviinoi obrabotke tverdykh khrupkikh keramik (Formation of Surface Defects in the Cutting of Brittle Ceramics), Available from VINITI, 1997, Yekaterinburg, no. 3606-V97.
Zhukov, Yu.N., Tikhonov, E.Yu., and Savinykh, K.M., Geometriya rezaniya almaznogo lezviinogo instrumenta (Cutting Geometry of a Diamond Cutter), Available from VINITI, 2010, Yekaterinburg, no. 606-V2010.
Zaporozhskii, V.P. and Lapshinov, B.A., Obrabotka poluprovodnikovnykh materialov (Machining of Semiconductor Materials), Moscow: Vysshaya Shkola, 1998.
Ogorodnikova, O.M., Research functions of CAE programs in integrated CAD/CAE/CAM technology, Vestn. Mashinostr., 2012, no. 1, pp. 25–31.
Ogorodnikova, O.M. and Panin, O.A., Computer study of microsystem components, Nano-Mikrosist. Tekhn., 2009, no. 5, pp. 12–15.
Ogorodnikov, A.I., Developing an ANSYS APDL program for numerical study of new technologies and materials in instrument design, Nauch. Oboz., 2013, no. 1, pp. 119–123.
Zhukov, Yu.N., Savinykh, K.M., and Tikhonov, E.Yu., Geometriya almaznogo instrumenta dlya skraibirovaniya s krivolineinoi rezhushchei kromkoi (Geometry of a Diamond Scribing Tool with a Curvilinear Cutting Edge), Available from VINITI, 2011, Yekaterinburg, no. 5-V2011.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.I. Ogorodnikov, Yu.N. Zhukov, E.E. Tikhonov, K.M. Savinykh, 2015, published in Vestnik Mashinostroeniya, 2015, No. 3, pp. 47–50.
About this article
Cite this article
Ogorodnikov, A.I., Zhukov, Y.N., Tikhonov, E.E. et al. Cutter for splitting brittle sheet blanks. Russ. Engin. Res. 35, 413–416 (2015). https://doi.org/10.3103/S1068798X15060131
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15060131