Abstract
In preparations for production, developers must consider the automatic control of the static loads in multicontact mechanical systems (such as gears, joints, bearings, and couplings). The methods developed in the present work prove efficient in the design and modernization of such systems.
Similar content being viewed by others
References
Iosilevich, G.B., Kontsentratsiya napryazhenii i deformatsii v detalyakh mashin (Stress and Strain Concentration in Machine Parts), Moscow: Mashinostroenie, 1981.
Birger, I.A., Shorr, B.F., and Iosilevich, G.B., Raschet na prochnost’ detalei mashin: Spravochnik (Strength Calculations for Machine Parts: A Handbook), Moscow: Mashinostroenie, 1993.
Grigoriev, S.N., Kozochkin, M.P., Sabirov, F.S., and Kutin, A.A., Diagnostic systems as basis for technological improvement, Procedia CIRP: Fifth CIRP Conference on High Performance Cutting, 2012, vol. 1, pp. 599–604.
Porvatov, A.N., An approach to the development of an information system for diagnostics of lathe equipment with the use of simulation modeling, Meas. Techn., 2011, vol. 54, no. 6, pp. 650–654.
Martinov, G.M., Ljubimov, A.B., Grigoriev, A.S., and Martinova, L.I., Multifunction numerical control solution for hybrid mechanical and laser machine tool, Procedia CIRP: Fifth CIRP Conference on High Performance Cutting, 2012, vol. 1, pp. 260–264.
Nekrasov, A.Ya. and Arbuzov, M.O., Loading of the spider teeth in chain transmissions, Vestn. MGTU Stankin, 2012, no. 3(22), pp. 33–36.
Sheveleva, G.I., Volkov, A.E., and Medvedev, V.I., Algorithms for analysis of meshing and contact of spiral bevel gears, Mechan. Mach. Theory, 2007, vol. 42, no. 2, pp. 198–215.
Medvedev, V.I. and Volkov, A.E., Synthesis of spiral bevel gear transmissions with a small shaft angle, J. Mechan. Des., 2007, vol. 129, no. 9, pp. 949–959.
Volkov, A.E., Medvedev, V.I., and Romanchuk, F.M., Use of a measurement technique for reproducing the surfaces of circular teeth of conical wheels, Meas. Techn., 2011, vol. 49, no. 8, pp. 787–793.
Nekrasov, A.Ya., Automated system for analysis of the load distribution in multicontact kinematic pairs: Mathematical models and calculation method, Vestn. MGTU Stankin, 2011, no. 2(14), pp. 8–13.
Prokhorov, A.F. Konstruktor i EVM (Computers in Design), Moscow: Mashinostroenie, 1987.
Nekrasov, A.Ya. and Arbuzov, M.O., Mechanical devices with multipair contact, Vestn. MGTU Stankin, 2012, no. 2(20), pp. 20–24.
Nekrasov, A.Ya. and Arbuzov, M.O., Model of the loading of elements in mechanical devices with multipair contact, Vestn. MGTU Stankin, 2012, no. 1(18), pp. 32–36.
Nekrasov, A.Ya. and Arbuzov, M.O., Automated calculation of the static load in turns of bolt joints, Vestn. MGTU Stankin, 2013, no. 1(24), pp. 66–69.
Petukhov, Y.E. and Domnin, P.V., Shaping precision in machining a screw surface, Russ. Eng. Res., 2011, vol. 31, no. 10, pp. 1013–1015.
Grechishnikov, V.A. and Kosarev, V.A., Innovative designs of metalworking tools for high-tech manufacturing, Sprav., Inzh. Zh., 2011, no. 12, pp. 38–44.
Kosarev, V.A., Grechishnikov, V.A., and Kosarev, D.V., Milling internal thread with planetary tool motion, Russ. Eng. Res., 2009, vol. 29, no. 11, pp. 1177–1179.
Nekrasov, A.Ya., Arbuzov, M.O., and Pirozhkov, V.G., Formalized determination of the additional load due to pitch errors in mechanical devices with multipair contact, Neft’, Gaz Bizn., 2011, no. 3, pp. 62–67.
Nekrasov, A.Ya. and Arbuzov, M.O., Algorithm for rationalizing the contact loads of elements in a multipair coupling on the basis of a discrete model, Vestn. MGTU Stankin, 2013, no. 2(25), pp. 80–85.
Nekrasov, A.Ya. and Arbuzov, M.O., Determining the number of teeth of the driving pulley in a belt transmission for uniform load distribution, Vestn. MGTU Stankin, 2010, no. 3(11), pp. 41–46.
Grigoriev, A.S. and Martinov, G.M., Scalable open cross-platform kernel of PCNC system for multi-axis machine tool, Procedia CIRP: Fifth CIRP Conference on High Performance Cutting, 2012, vol. 1, pp. 238–243.
Solomentsev, Yu.M. and Mitrofanov, V.G., Design and technological information in manufacturing: Information technology in support of the simulation and control of shaping motion, Vestn. MGTU Stankin, 2010, no. 1(9), pp. 107–110.
Sobolev, A.N. and Kosov, M.G., Automated kinematic and dynamic analysis of technological machines, Vestn. MGTU Stankin, 2010, no. 2(10), pp. 32–36.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.Ya. Nekrasov, M.O. Arbuzov, A.N. Sobolev, 2014, published in STIN, 2014, No. 12, pp. 2–6.
About this article
Cite this article
Nekrasov, A.Y., Arbuzov, M.O. & Sobolev, A.N. Automatic control of the static loads in multicontact mechanical systems. Russ. Engin. Res. 35, 442–446 (2015). https://doi.org/10.3103/S1068798X1506012X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1506012X