Abstract
The force and speed characteristics of the complex and cylindrical milling of wood are investigated; in the analysis, the inertial forces on the chip are taken into account. The chip dispersion is greater in complex milling, according to theoretical analysis and experimental confirmation.
Similar content being viewed by others
References
Fomin, A.A., Oborudovanie i tekhnologii mekhanicheskoi obrabotke otkhodov lesotsileniya (Equipment and Technology for Machining Sawmill Waste), Moscow: Mashinostroenie, 2013.
Fomin, A.A., Analysis of milling systems for blanks with nonuniform properties, Vestn. Mashinostr., 2013, no. 2, pp. 59–61.
Fomin, A.A., Gusev, V.G., and Safin, R.G., Cutting power in the complex milling of sawmill waste, Vestn. Kazansk. Tekhnol. Inst., 2013, no. 14, pp. 193–198.
Fomin, A.A., Surface microgeometry in machining blanks with nonuniform properties, Sborka Mashinostr., Pribostr., 2012, no. 12, pp. 27–29.
Fomin, A.A., Kinematics of surface formation in milling, Russ. Eng. Res., 2013, vol. 33, no. 11, pp. 660–662.
Lyubchenko, V.I., Rezanie drevesiny i drevesnykh materialov: Uchebnik dlya vuzov (Wood Cutting: A University Textbook), Moscow: MGUL, 2004.
Fomin, A.A., Simulation of the vibrational displacement of a complex mill under the action of the cutting force, Russ. Eng. Res., 2013, vol. 33, no. 1, pp. 57–60.
Fomin, A.A. and Gusev, V.G., Safe machining of blanks with nonuniform properties, Russ. Eng. Res., 2013, vol. 33, no. 10, pp. 602–606.
Fomin, A.A. and Gusev, V.G., Vibrational displacement of the spindle under the action of static tool disequilibrium, Russ. Eng. Res., 2013, vol. 33, no. 7, pp. 412–415.
Fomin, A.A., Reducing tool vibration in complex slab milling, Vestn. Mashinostr., 2013, no. 1, pp. 44–48.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Fomin, V.G. Gusev, R.G. Safin, R.R. Safin, 2015, published in Vestnik Mashinostroeniya, 2015, No. 3, pp. 53–56.
About this article
Cite this article
Fomin, A.A., Gusev, V.G., Safin, R.G. et al. Dispersion of the margin removed in complex milling. Russ. Engin. Res. 35, 417–420 (2015). https://doi.org/10.3103/S1068798X15060040
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15060040