Abstract
The production of axisymmetric shells by rotary drawing on conical rollers is proposed, with distribution of the deformation zone over three rollers. This technology reduces the radial deforming forces by 25–30%.
Similar content being viewed by others
References
Greditor, M.A., Davil’nye raboty i rotatsionnoe vydavlivanie (Spinning Operations and Rotary Extrusion), Moscow: Mashinostroenie, 1971.
Mogil’nyi, N.I., Rotatsionnaya vytyazhka obolochkovykh detalei na stankakh (Rotary Drawing of Shells on Machine Tools), Moscow: Mashinostroenie, 1983.
Kovka i shtampovka: Spravochnik: T. 4. Listovaya shtampovka (Forging and Stamping: A Handbook, Vol. 4: Sheet Stamping), Yakovlev, S.S., Ed., Moscow: Mashinostroenie, 2010.
Yakovlev, S.S., Tregubov, V.I., and Yakovlev, S.P., Rotatsionnaya vytyazhka s utoneniem stenki osesimmetrichnykh detalei iz anizotropnykh trubnykh zagotovok na spetsializirovannom oborudovanii (Rotary Drawing of Axisymmetric Parts from Anisotropic Pipe Blanks, with Wall Thinning, on Specialized Equipment), Moscow: Mashinostroenie, 2009.
Tregubov, V.I., Yakovlev, S.S., Osipova, E.V., et al., Innovative rotary-drawing processes for complex axisymmetric parts, Kuzn.-Shtamp. Proizv., Obrab. Met. Davlen., 2013, no. 11, pp. 9–16.
Pilipenko, O.V., Rotary extension of anisotropic pipe blanks, with wall thinning, Russ. Eng. Res., 2008, vol. 28, no. 4, pp. 352–356.
Yakovlev, S.S., Kukhar’, V.D., and Tregubov, V.I., Teoriya i tekhnologiya shtampovki anizotropnykh materialov (Theory and Technology of the Stamping of Anisotropic Materials), Yakovlev, S.S., Ed., Moscow: Mashinostroenie, 2012.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.S. Yakovlev, V.I. Tregubov, O.V. Pilipenko, K.S. Remnev, 2015, published in Vestnik Mashinostroeniya, 2015, No. 1, pp. 73–78.
About this article
Cite this article
Yakovlev, S.S., Tregubov, V.I., Pilipenko, O.V. et al. Rotary drawing of axisymmetric shells with distribution of the deformation zone. Russ. Engin. Res. 35, 270–276 (2015). https://doi.org/10.3103/S1068798X15040243
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15040243