Abstract
An algorithm is proposed for Mathcad calculation of the profile of a disk tool (mill or wheel) used in machining a helical surface with a circular profile. The algorithm is simple and clear.
Similar content being viewed by others
References
Yulikov, M.I., Gorbunov, B.I., and Kolesov, N.V., Proektirovanie i proizvodstvo rezhushchego instrumenta (Design and Production of Cutting Tools), Moscow: Mashinostroenie, 1987.
Lyukshin, V.S., Teoriya vintovykh poverkhnostei v proektirovanii rezhushchikh instrumentov (Theory of Helical Surfaces in Cutting-Tool Design), Moscow: Mashinostroenie, 1968.
Lashnev, S.I. and Yulikov, M.I., Raschet i konstruirovanie metallorezhushchikh instrumentov s primeneniem EVM (Computer Calculation and Design of Metal-Cutting Tools), Moscow: Mashinostroenie, 1975.
Russian patent 2422251.
Petukhov, Yu.E., Formoobrazovanie chislennymi metodami (Shaping by Numerical Methods), Mosow: Yanus-K, 2004.
Kolesov, N.V. and Petukhov, Yu.E., Computer models of cutting tools, Russ. Eng. Res., 2007, vol. 27, no. 11, pp. 812–814.
Kolesov, N.V. and Kirsanova, O.G., Shaping of grinding wheels for the relieving of hobs, Russ. Eng. Res., 2012, vol. 32, no. 4, pp. 402–403.
Shalamov, V.G. and Smetanin, S.D., Profiling methods for helical surfaces, Russ. Eng. Res., 2010, vol. 30, no. 2, pp. 170–172.
Grigor’ev, S.N., Kozochkin, M.P., Sabirov, F.S., and Sinopal’nikov, V.A., Diagnostics of machine tools today, Vestn. MGTU Stankin, 2010, no. 4, pp. 27–36.
GOST (State Standard) ISO 230-1-2010: Tests of Machine Tools, Part 1: Methods of Measuring the Geometric Parameters, 2011.
Protsessy formoobravanie i SAPR metallorezhushchego instrumenta: Ucheb. Posobie (Shaping of Metal-Cutting Tools and CAD Systems: A Textbook), Grechishnikova, V.A., Ed., Moscow: MGTU Stankin, 2010.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.V. Kolesov, P.V. Domnin, S.S. Zav’yalov, 2014, published in STIN, 2014, No. 10, pp. 15–16.
About this article
Cite this article
Kolesov, N.V., Domnin, P.V. & Zav’yalov, S.S. Disk tool for machining helical surfaces. Russ. Engin. Res. 35, 290–291 (2015). https://doi.org/10.3103/S1068798X15040152
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15040152