Abstract
The formation and properties of coatings applied to 38XP3MA steel by laser surfacing with coaxial supply of nickel powder are considered. The wear rate and frictional coefficient for a shaft and a slip-bearing bush are determined by calculation and experiment.
Similar content being viewed by others
References
Grigor’yants, A.G., Safonov, A.N., and Shibaev, V.V., Influence of powder-surfacing parameters on the formation and size of the surfaced areas, Svarochn. Proizv., 1983, no. 6, pp. 11–13.
Tesker, E.I., Gur’ev, V.A., and Tesker, S.E., Microstructure and properties of laser-applied surface layers, Fiz. Khim. Obrab. Mater., 2004, no. 1, pp. 38–42.
Biryukov, V.P., Surface modification by laser radiation, Fotonika, 2010, no. 3, pp. 18–21.
Grigor’yants, A.G., Shiganov, I.N., and Misyurov, A.I., Tekhnologicheskie protsessy lazernoi obrabotki: Uchebnoe posobie dlya vuzov (Laser Treatment: A University Textbook), Grigor’yants, A.G., Ed., Moscow: MGTU im. Baumana, 2006.
Grigor’yants, A.G., Misyurov, A.I., and Tret’yakov, R.S., Influence of the parameters of coaxial laser surfacing on the formation of the surfaced areas, Tekhnol. Mashinostr., 2011, no. 11, pp. 19–21.
Biryukov, V.P., Smirnov, S.N., Petrovskii, V.N., et al., Tekhnologii uprochneniya, naneseniya pokrytii i remonta: teoriya i praktika. Materialy MNPK (Practical and Theoretical Aspects of Strengthening, Coating Application, and Repair: Conference Proceedings), St. Petersburg: Izd. Politekhnchekogo Universiteta, 2013, vol. 1, pp. 27–30.
Kogaev, V.P. and Drozdov, Yu.N., Prochnost’ i iznosostoikost’ detalei mashin (Strength and Wear Resistance of Machine Parts), Moscow: Vysshaya Shkola, 1991.
Drozdov, Yu.N., Yudin, E.G., and Belov, A.I., Prikladnaya tribologiya (trenie, iznos, smazka) (Applied Tribology: Friction, Wear, Lubrication), Moscow: Eko-Press, 2010.
Biryukov, V.P., Lapteva, V.G., Khrennikova, I.A., and Tatarkin, D.Yu., Restoration of a frictional pair consisting of a shaft and a slip-bearing bush by laser surfacing, Probl. Mashinostr. Nadezhn. Mash., 2013, no. 5, pp. 91–95.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.P. Biryukov, 2015, published in Vestnik Mashinostroeniya, 2015, No. 1, pp. 51–54.
About this article
Cite this article
Biryukov, V.P. Wear of a laser-surfaced steel shaft and a slip-bearing bush. Russ. Engin. Res. 35, 249–252 (2015). https://doi.org/10.3103/S1068798X15040073
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15040073