Abstract
The need to design grinding operations on the basis of comprehensive description of grinding-wheel performance is established. The design of grinding operations on the basis of group technology is discussed.
Similar content being viewed by others
References
Ardashev, D.V., Anel’chik, D.E., Bugorin, G.I., et al., Rezhimy rezaniya na raboty, vypolnyaemye na shlifoval’nykh i dovorodnykh stankakh s ruchnym upravleniem i poluavtomatakh: Spravochnik (Cutting Conditions in Manual and Semiautomatic Cutting and Finishing Machines: A Handbook), Chelyabinsk: ATOKSO, 2007.
Ardashev, D.V., Operational characteristics of a grinding wheel in rating form, Tekhnol. Mashinostr., 2010, no. 4, pp. 26–28.
Ardashev, D.V., Describing the capabilities of grinding wheels, Vestn. Yuzh.-Ural’sk. Gos. Univ., Ser. Mashinostr., 2012, no. 33, pp. 113–116.
Ardashev, D.V., Two-parameter assessment of grinding wheel performance, Russ. Eng. Res., 2010, vol. 30, no. 7, pp. 705–707.
Ardashev, D.V., Standardization of grinding wheels, Russ. Eng. Res., 2011, vol. 31, no. 9, pp. 910–912.
Ardashev, D.V., Information and methods for selecting abrasive operations in current manufacturing conditions, Fund. Issled., 2013, no. 6, pp. 813–817.
Ardashev, D.V., Determining the life of grinding wheels on the basis of their ratings, Metalloobrabotka, 2010, no. 1(55), pp. 23–27.
Ardashev, D.V., Selecting the conditions and tools in the design of group grinding technology, Fundamental’nye i prikladnye problem tekhniki i tekhnologii (Fundamental and Applied Problems in Engineering and Technology), Orel: OGU, 2011, no. 4/2(288), pp. 14–19.
D’yakonov, A.A., Effective utting onditions in abrasive mashining, Russ. Eng. Res., 2014, vol. 34., no 12, pp. 778–780.
Ardashev, D.V., Chemical affinity of the abrasive and the blank, Metalloobrabotka, 2011, no. 6, pp. 29–32.
Ardashev, D.V., Kinetic analysis of the life of abrasive grains, Metalloobrabotka, 2013, no. 3, pp. 10–19.
Ardashev, D.V., Thermofluctuational wear of abrasive grains in grinding, Naukoemk. Tekhnol., 2013, no. 12, pp. 23–28.
D’yakonov, A.A., Blank-cutter interaction in high-speed cutting, Russ. Eng. Res., 2014, vol. 34, no 12, pp. 775–777.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.V. Ardashev, 2014, published in STIN, 2014, No. 10, pp. 31–33.
About this article
Cite this article
Ardashev, D.V. Group abrasive machining in flexible production. Russ. Engin. Res. 35, 305–306 (2015). https://doi.org/10.3103/S1068798X1504005X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1504005X