Abstract
A method is proposed for determining the life of an abrasive grain on the basis of its internal stress in grinding. The mechanical interaction of a single abrasive grain with the blank is simulated. Conversion from the stress state of the grain to the mass of abrasive removed by various wear mechanisms provides the basis for a group grinding technology, in which efficient machining equipment and conditions are established by predicting wheel performance.
Similar content being viewed by others
References
Regel’, V.R., Slutsker, A.I., and Tomashevskii, E.E., Kineticheskaya teoriya prochnosti tverdykh tel (Kinetic Theory of the Strength of Solids), Moscow: Nauka, 1974.
Maslov, E.N., Teoriya shlifovaniya materialov (Theory of Grinding), Moscow: Mashinostroenie, 1974.
D’yakonov, A.A., Blank-Cutter interaction in high-speed cutting, Russ. Eng. Res., 2014, vol. 34., no 12, pp. 775–777.
Shmidt, I.V., Model of the stress state of a laminar polymer-composite system in cutting, Fund. Probl. Tekhn. Tekhnol., 2010, no. 4, pp. 46–48.
D’yakonov, A.A., Effective cutting conditions in abrasive mashining, Russ. Eng. Res., 2014, vol. 34., no 12, pp. 778–780.
Boldyrev, I.S. and Ardashev, D.V., Determining the strength of the abrasive grain in grinding, Tekhnologicheskoe obespechenie mashinostoitel’nykh proizvodstv: Sb. trudov I mezhdunar. zaoch. nauch.-tekhn. konf. (Technological Aspects of Manufacturing: Proceedings of the First International Correspondence Conference, Chelyabinsk: YuUrGU, 2013, pp. 516–523.
Ardashev, D.V., Thermomechanical fatigue of the abrasive grain, Metalloobrabotka, 2012, no. 4, pp. 2–4.
Ardashev, D.V., Chemical affinity of the abrasive and the blank, Metalloobrabotka, 2011, no. 6, pp. 29–32.
Ardashev, D.V. and Akhlyustina, V.V., Equipment for testing the interaction of the abrasive grain and the blank in grinding, Tekhnol. Mashinostr., 2013, no. 6, pp. 27–28.
Ardashev, D.V., Standardization of grinding wheels, Russ. Eng. Res., 2011, vol. 31, no. 9, pp. 910–912.
Ardashev, D.V., Describing the capabilities of grinding wheels, Vestn. Yuzh.-Ural’sk. Gos. Univ., Ser. Mashinostr., 2012, no. 33, pp. 113–116.
Ardashev, D.V., Principles of group grinding technology, Vestn. Mashinostr., 2012, no. 11, pp. 54–55.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.V. Ardashev, 2014, published in STIN, 2014, No. 10, pp. 27–31.
About this article
Cite this article
Ardashev, D.V. Predicting the working life of abrasive grains. Russ. Engin. Res. 35, 302–304 (2015). https://doi.org/10.3103/S1068798X15040048
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15040048