Abstract
The surface morphology of powder particles obtained by electrospark dispersion of copper-wire wastes is investigated. Such powder is used for the electrospark application of a copper surface coating to worn components.
Similar content being viewed by others
References
Galaev, V.K., Bragin, L.P., and Safonov, B.P., Vosstanovlenie i uprochnenie detalei oborudovaniya v usloviyakh remontno-mekhanicheskogo proizvodstva khimicheskogo predpriyatiya (Restoration and Strengthening of Components in Repair Shops at Chemical Plants), Novomoskovsk: NAK AZOT, 2000.
Babich, B.N., Vershinina, E.V., Glebov, V.A., et al., Metallicheskie poroshki i poroshkovye materialy: Spravochnik (Metallic Powders and Powder-Based Materials: A Handbook), Moscow: EKOMET, 2005.
Ageev, E.V., Powder production from solid-alloy waste by electrospark dispersion, Elektrometallurgiya, 2011, no. 10, pp. 24–27.
Russian patent 2449859.
Ageev, E.V. and Ageeva, E.V., Development of equipment for the production of industrial powder from waste consisting of solid-tungsten alloys, Vestn. Mashinostr., 2013, no. 11, pp. 51–57.
Ageev, E.V., Surface morphology of powder particles produced by the electrospark dispersion of solid alloys containing tungsten, Tekhnol. Met., 2011, no. 7, pp. 30–32.
Ageev, E.V., Physicomechanical properties of hard-alloy powder obtained by the electrospark dispersion of waste, Uprochn. Tekhnol. Pokryt., 2011, no. 6, pp. 8–14.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.V. Ageeva, N.M. Khor’yakova, E.V. Ageev, 2014, published in Vestnik Mashinostroeniya, 2014, No. 8, pp. 73–75.
About this article
Cite this article
Ageeva, E.V., Khor’yakova, N.M. & Ageev, E.V. Morphology of copper powder produced by electrospark dispersion from waste. Russ. Engin. Res. 34, 694–696 (2014). https://doi.org/10.3103/S1068798X14110045
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14110045