Abstract
Methods of shaping the blank in cutting are considered and classified. Their advantages and disadvantages are outlined, and their use is illustrated.
Similar content being viewed by others
References
Yulikov, M.I., Gorbunov, B.I., and Kolesov, N.V., Proektirovanie i proizvodstvo rezhushchego instrumenta (Design and Production of Cutting Tools), Moscow: Mashinostroenie, 1987.
Lyukshin, V.S., Teoriya vintovykh poverkhnostei v proektirovanii rezhushchikh instrumentov (Theory of Helical Surfaces in the Design of Cutting Tools), Moscow: Mashinostroenie, 1968.
Petukhov, Yu.E., Formoobrazovanie chislennymi metodami (Shaping by Numerical Methods), Moscow: Yanus-K, 2004.
Kolesov, N.V. and Petukhov, Yu.E., Two types of computer models of cutting tools, Stanki Instrum., 2007, no. 7, pp. 23–25.
Russian patent 2 422 251.
Lashnev, S.I. and Yulikov, M.I., Raschet i konstruirovanie metallorezhushchikh instrumentov s primeneniem EVM (Computer-Assisted Calculation and Design of Metal-Cutting Tools), Moscow: Mashinostroenie, 1975.
Demidov, V.V. and Demidov, E.V., Model of the cutting of cylindrical gears and corrected gear cutters by modular hobs, Tekhnol. Mashinostr., 2010, no. 7, pp. 53–57.
Kolesov, N.V. and Kirsonova, O.G., Straightening of hob-relieving wheels, Russ. Eng. Res., 2012, vol. 32, no. 4, pp. 402–403.
Grigor’ev, S.N., Kozochkin, M.P., Sabirov, F.S., and Sinopal’nikov, V.A., Problems of technical diagnostics of machine equipment at the present stage of development, Vestn. MGTU Stankin, 2010, no. 4, pp. 27–36.
Bushuev, V.V., Kuzovkin, V.A., Molodtsov, V.V., and Filatov, V.V., Analysis of supply-drive errors in metalcutting machines and their correction, Izmerit. Tekh., 2006, no. 6, pp. 18–22.
Kozochkin, M.P., Sabirov, F.S., and Popikov, A.N., Vibroacoustic diagnostics in turning, Vestn. MGTU Stankin, 2009, no. 1(15), pp. 23–29.
Zavgorodnii, V.I., Kozochkin, M.P., Maslov, A.R., and Sabirov, F.S., Influence of the dynamic characteristics of the tool and the blank on the vibroacoustic monitoring of the cutting process, Russ. Eng. Res., 2010, vol. 30, no. 9, pp. 939–943.
GOST (State Standard) 25762-83: Cutting: Terms, Definitions, and Notation for General Concepts, 1983.
GOST (State Standard) R ISO 230-1-2010: Tests of Machine Tools, Part 1: Methods of Measuring the Geometric Parameters, 2011.
T-FLEX CAD. Trekhmernoe modelirovanie. Rukovodstvo pol’zovatelya (T-FLEX CAD: Three-Dimensional Simulation: User Handbook), Moscow: Top Sistemy, 2008.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.E. Petukhov, N.V. Kolesov, S.Yu. Yurasov, 2014, published in Vestnik Mashinostroeniya, 2014, No. 3, pp. 65–71.
About this article
Cite this article
Petukhov, Y.E., Kolesov, N.V. & Yurasov, S.Y. Geometric shaping in cutting. Russ. Engin. Res. 34, 374–380 (2014). https://doi.org/10.3103/S1068798X14060161
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14060161