References
Vainer, L.G. and Shakhnovskii, S.S., Improving the grinding precision of roller ends, Stanki Instrum., 1985, no. 5, pp. 31–32.
Shakhnovskii, S.S., Dynamics of unattached blanks in bidirectional end grinding, Stanki Instrum., 1990, no. 3, pp. 30–31.
Vainer, L.G., Determining the parameters of the technological space in bidirectional end grinding, Vestn. Mashinostr., 2011, no. 12, pp. 72–77.
Vainer, L.G., Dynamics of the technological space in shaping the ends of a blank by bidirectional grinding, Naukoemkie tekhnologii v mashinostroenii i aviadvigatelestroenie: Materialy IV mezhdunar. nauch.-tekhn. konf. (High Technology in Manufacturing and Airplane-Motor Design: Proceedings of Fourth International Conference), Rybinsk: RGATU im. P.A. Solov’eva, 2012, vol. 1, pp. 12–13.
Vainer, L.G., Taking account of asymmetry in calculating the parameters for bidirectional end grinding of unattached blanks, Vestn. Donsk. Gos. Tekhn. Univ., 2012, no. 4(65), pp. 13–20.
Reshetov, D.N. and Portman, V.T., Tochnost’ metallorezhushchikh stankov (Precision of Metal-Cutting Machines), Moscow: Mashinostroenie, 1986.
Vainer, L.G., Constructing models of shaping in margin removal, for the example of end grinding, Fund. Prikl. Probl. Tekhn. Tekhnol., 2012, no. 2, issue 6(292), pp. 21–28.
Kaminskaya, V.V. and Vainer, L.G., Calculating the cutting forces in bidirectional end grinding of rollers, Povyshenie effektivnosti ispol’zovaniya tekhnologicheskogo oborudovaniya, gibkikh avtomatizirovannykh stanochnykh kompleksov: Tez. dokl. nauch.-tekhn. konf. (More Efficient Use of Technological Equipment and Flexible Automated Machine-Tool Systems: Abstracts of Conference Proceedings), Komsomolsk-on-Amur: KhTsNTI, 1985, pp. 12–13.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.G. Vainer, A.G. Ivakhnenko, I.V. Karabanov, 2013, published in STIN, 2013, No. 10, pp. 28–34.
About this article
Cite this article
Vainer, L.G., Ivakhnenko, A.G. & Karabanov, I.V. Systematic dynamic factors in the shaping of opposite end surfaces. Russ. Engin. Res. 34, 340–345 (2014). https://doi.org/10.3103/S1068798X14050165
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14050165