Abstract
The stress and kinematic state of rectangular strip in upsetting with friction is considered.
Similar content being viewed by others
References
Kachanov, L.M., Osnovy teorii plastichnosti (Fundamentals of Plasticity Theory), Moscow: Nauka, 1969.
Storozhev, M.V. and Popov, E.A., Teoriya obrabotka metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1977.
Vorontsov, A.L., Theoretical aspects of technological mechanics. 7. Axisymmetric problems in plasticity theory. Part 2, Russ. Eng. Res., 2014, vol. 34, no. 2.
Vorontsov, A.L., Theoretical aspects of technological mechanics. 3. The invalidity of tangential-stress pairing, Russ. Eng. Res., 2013, vol. 33, no. 6.
Vorontsov, A.L., Predicting the failure of a continuous blank in upsetting, Proizv. Prokata, 2007, no. 9, pp. 8–14.
Bronshtein, I.N. and Semendyaev, K.A., Spravochnik po matematike (Mathematical Handbook), Moscow: GITTL, 1956.
Prager, W. and Hodge, F.G., Theory of Perfectly Plastic Bodies, New York: Wiley, 1951.
Johnson, W. and Mellor, P.B., Engineering Plasticity, London: Van Nostrand, 1973.
Tarnovskii, I.Ya., Pozdeev, A.A., Ganago, O.A., et al., Teoriya obrabotka metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Metallurgizdat, 1963.
Vorontsov, A.L., Change in geometry of a cylindrical blank in upsetting with contact friction, Russ. Eng. Res., 2009, vol. 29, no. 7, pp. 705–713.
Sokolovskii, V.V., Teoriya plastichnosti (Theory of Plasticity), Moscow: Vysshaya Shkola, 1969.
Hill, R., Mathematical Theory of Plasticity, Oxford: Clarendon Press, 1950.
Vorontsov, A.L., Theoretical aspects of technological mechanics. 8. Plane plasticity-theory problem. Part 1, Russ. Eng. Res., 2014, vol. 34, no. 3.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, 2014, published in Vestnik Mashinostroeniya, 2014, No. 1, pp. 67–74.
Earlier articles in this series appeared in Russian Engineering Research, 2013, nos. 4–12; and 2014, nos. 1–3. The next will be published in Russian Engineering Research, 2014, no. 5.
About this article
Cite this article
Vorontsov, A.L. Theoretical aspects of technological mechanics. 8. Plane problems in plasticity theory. Part 2. Russ. Engin. Res. 34, 227–234 (2014). https://doi.org/10.3103/S1068798X14040194
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14040194