Abstract
The solution of plane plastic-deformation problems on the basis of applied plasticity theory is critically appraised. New approaches are proposed to the plane upsetting of rectangular strip and the insertion of a punch in a half-space.
Similar content being viewed by others
References
Vorontsov, A.L., Theoretical aspects of technological mechanics. 6. Comparing plasticity theory with the theory of the pressure treatment of metals. Part 1, Russ. Eng. Res., 2013, vol. 33, no. 10.
Prager, W. and Hodge, F.G., Theory of Perfectly Plastic Bodies, New York: Wiley, 1951.
Kachanov, L.M., Osnovy teorii plastichnosti (Fundamentals of Plasticity Theory), Moscow: Nauka, 1969.
Hill, R., Mathematical Theory of Plasticity, Oxford: Clarendon Press, 1950.
Sokolovskii, V.V., Teoriya plastichnosti (Theory of Plasticity), Moscow: Vysshaya Shkola, 1969.
Johnson, W. and Mellor, P.B., Engineering Plasticity, London: Van Nostrand, 1973.
Storozhev, M.V. and Popov, E.A., Teoriya obrabotka metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1977.
Malinin, N.N., Prikladnaya teoriya plastichnosti i poluchesti (Applied Theory of Plasticity and Creep), Moscow: Mashinostroenie, 1975.
Vorontsov, A.L., Extrusion of hollow parts by a cylindrical punch with a spherical end, Vestn. Mashinostr., 1999, no. 11, pp. 46–50.
Vorontsov, A.L., Teoriya shtampovki vydavlivaniem (Theory of Extrusive Stamping), Moscow: Mashinostroenie, 2004.
Kuznetsov, D.P., Lyasnikov, A.V., and Kudryavtsev, V.A., Tekhnologiya formoobrazovaniya kholodnym vydavlivaniem polostei detalei press-form i shtampov (Shaping the Cavities of Mold and Die Components by Cold Extrusion), Moscow: Mashinostroenie, 1973.
Ovchinnikov, A.G., Osnovy teorii shtampovki vydavlivaniem na pressakh (Theoretical Principles of Extrusive Stamping in Dies), Moscow: Mashinostroenie, 1983.
Renne, I.P. and Podlivaev, Yu.V., Closed piercing of high-strength aluminum alloys, Kuzn.-Shtamp. Proizv., 1976, no. 5, pp. 7–9.
Smirnov-Alyaev, G.A., Soprotivlenie materialov plasticheskomu deformirovaniyu (Resistance to Plastic Deformation), Leningrad: Mashinostroenie, 1978.
Tomlenov, A.D., Teoriya plasticheskogo deformirovaniya metallov (Theory of the Plastic Deformation of Metals), Moscow: Metallurgiya, 1972.
Nepershin, R.I., Slip-line simulation of plastic flow, Kuzn.-Shtamp. Proizv., 2004, no. 1, pp. 3–11.
Stepanskii, L.G. Raschety protsessov obrabotki metallov davleniem (Calculations of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1979.
Il’yushin, A.A., Plastichnost’ (Plasticity), Moscow-Leningrad: GITTL, 1948.
Tarnovskii, I.Ya., Pozdeev, A.A., Ganago, O.A., et al., Teoriya obrabotka metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Metallurgizdat, 1963.
Vorontsov, A.L., Theoretical aspects of technological mechanics. 3. The invalidity of tangential-stress pairing, Russ. Eng. Res., 2013, vol. 33, no. 6.
Teoriya plastichnosti (Plasticity Theory), Rabotnov, Yu.N., Ed., Moscow: GIIL, 1948.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, 2013, published in Vestnik Mashinostroeniya, 2013, No. 12, pp. 59–68.
Earlier articles in this series appeared in Russian Engineering Research, 2013, nos. 4–12; and 2014, nos. 1–2. The next will be published in Russian Engineering Research, 2014, no. 4.
About this article
Cite this article
Vorontsov, A.L. Theoretical aspects of technological mechanics. 8. Plane problems in plasticity theory. Part 1. Russ. Engin. Res. 34, 142–151 (2014). https://doi.org/10.3103/S1068798X14030186
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14030186