Abstract
The surface interactions in the bush-shaft joint are considered, in the case of press fitting. The influence of the conditions of pressing and subsequent diffusional sintering and also the surface quality on the strength of the joint is investigated. Preliminary heat treatment may be used to ensure the required tightness in the joint.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Lyushinskii, A.V., Diffusionnaya svarka raznorodnykh materialov (Diffusional Welding of Unlike Materials), Moscow: Izd. Tsentr Akademik, 2006.
Konyushkov, G.S. and Musin, R.A., Spetsial’nye metody svarki davleniem (Special Pressure-Welding Methods), Saratov: APR Media, 2009.
Karakozov, Z.S., Svarka metallov davleniem (Pressure Welding of Metals), Moscow: Mashinostroenie, 1986.
Murav’ev, V.I., Mel’nichuk, A.F., and Bakhmatov, P.V., Influence of diffusional interaction of particles of 2M2A alloy powder and VT20 alloy sheet on the properties of composite structures, Zagotov. Proizv. Mashinostr., 2011, no. 1, pp. 42–45.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.I. Murav’ev, P.V. Bakhmatov, V.S. Pitsyk, 2013, published in Vestnik Mashinostroeniya, 2013, No. 12, pp. 73–79.
About this article
Cite this article
Murav’ev, V.I., Bakhmatov, P.V. & Pitsyk, V.S. Production of a bush-shaft joint by pressing and subsequent sintering. Russ. Engin. Res. 34, 156–162 (2014). https://doi.org/10.3103/S1068798X14030137
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14030137