Abstract
Methods of determining the energy efficiency of machine tools are analyzed, including methods based on the input energy balance, the expenditures in machining, and energy losses in the shaping structure of the machine tool. The energy efficiency may be assessed in terms of the energy ratio of the physical processes within the machine tool. On that basis, metal-cutting machines may be classified by energy efficiency.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Kuznetsov, A.P. and Tkacheva, O.N., Sovremennye sistemy avtomatizirovannogo proektirovaniya tekhnologicheskikh protsessov v mashinostroenii (Automated Design Systems for Technological Processes in Manufacturing), Moscow: NIImash, 1984.
Kosov, M.G. and Kuznetsov, A.P., Significance of the concept of a profile in the simulation of technological processes and machines, Vestn. MGTU Stankin, 2012, vol. 19, no. 1, pp. 148–155.
Kuznetsov, A.P., Teplovoe povedenie i tochnost’ metallorezhushchikh stankov (Thermal Behavior and Precision of Metal-Cutting Machines), Moscow: Yanus-K, 2011.
Kuznetsov, A.P., Metody otsenki i kontrolya kachestva metallorezhushchikh stankov s ChPU (Methods of Assessing and Monitoring the Quality of Numerically Controlled Metal-Cutting Machines), Moscow: VNIITEMR, 1985.
Kuznetsov, A.P. and Kosov, M.G., Structural precision of metal-cutting machines, Russ. Eng. Res., 2012, vol. 32, no. 5, pp. 482–490.
Kuznetsov, A.P. and Kosov, M.G., Structural precision of metal-cutting machines, Russ. Eng. Res., 2012, vol. 32, no. 11–12, pp. 725–729.
Dietmair, A. and Verl, A., Energy consumption for casting and optimization for tool machines, Modern Mach. Sci. J., 2009, vol. 3, pp. 62–67.
Grigor’ev, S.N., Progress at Stankin Moscow State Technical University, Russ. Eng. Res., 2010, vol. 30, no. 9, pp. 928–930.
GOST (State Standard) R 54430-2011: Metal- and Woodworking Equipment; Measures of Energy Efficiency; Nomenclature; Methods of Parameter Determination and Standardization, 2012.
Kuznetsov, A.P., Teplovoi rezhim metallorezhushchikh stankov (Thermal Conditions of Metal-Cutting Machines), Moscow: Yanus-K, 2013.
Grigor’ev, S.N., Zmieva, K.A., and Ugleva, E.M., Energoeffektivnost’ protsessov nanesaniya pokrytie na instrument (Energy Efficiency of Coating Application on Tools), Moscow: Yanus-K, 2012.
Grigoriev, S.N., Sinopalnikov, V.A., Tereshin, M.V., and Gurin, V.D., Control of parameters of the cutting process on the basis of diagnostics of the machine tool and workpiece, Meas. Techn., 2012, vol. 55(5), pp. 555–558.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.N. Grigor’ev, A.P. Kuznetsov, M.A. Volosova, H.-J. Koriath, 2013, published in Vestnik Mashinostroeniya, 2013, No. 12, pp. 51–56.
About this article
Cite this article
Grigor’ev, S.N., Kuznetsov, A.P., Volosova, M.A. et al. Classification of metal-cutting machines by energy efficiency. Russ. Engin. Res. 34, 136–141 (2014). https://doi.org/10.3103/S1068798X14030058
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14030058