References
Lipatov, A.A., Influence of the temperature dependence of the blank’s thermal conductivity on the contact interaction and type of chip formation, Stanki Instrum., 2006, no. 8, pp. 37–40.
Lipatov, A.A., Chigirinskii, Yu.L., and Kormilitsyn, S.I., Contact interaction at the tool’s rear wear area in cutting austenitic steel, Izv. VolgGTU: Mezhvuz. sb. nauch. st. Seriya Progressivenye tekhnologii v mashinostroenii (Proceedings of Volgograd State Technological University: Interuniversity Anthology on Progressive Manufacturing Technologies), Volgograd: Izd. VolgGTU, 2011, vol. 7, no. 13(86), pp. 27–30.
Lipatov, A.A. and Chigirinskii, Yu.L., Extrapolation and iteration in engineering thermal calculations, Izv. VolgGTU: Mezhvuz. sb. nauch. st. Seriya Aktual’nye problemy upravleniya, vychislitel’noi tekhniki i informatiki v tekhnicheskikh sistemakh (Proceedings of Volgograd State Technological University: Interuniversity Anthology on Pressing Problems of Control, Computation, and Information Science in Engineering Systems), Volgograd: Izd. VolgGTU, 2011, vol. 12, no. 11(84), pp. 26–29.
Lipatov, A.A., Chigirinskii, Yu.L., and Kormilitsyn, S.I., Determining the cutting forces at the tool’s rear wear area, Russ. Eng. Res., 2010, vol. 30, no. 11, pp. 1158–1160.
Reznikov, A.N., Teplofiziki protsessov mekhanicheskoi obrabotki materialov (Thermal Physics of Machining), Moscow: Mashinostroenie, 1981.
Talantov, N.V., Fizicheskie osnovy protsessa rezaniya, iznashivaniya i razrusheniya instrumenta (Physical Principles of Cutting, Wear, and Tool Failure), Moscow: Mashinostroenie, 1992.
Bobrov, V.F., Granovskii, G.I., and Zorev, N.N., Razvitie nauki o rezanii metallov (Development of the Science of Metal Cutting), Moscow: Mashinostroenie, 1967.
Lipatov, A.A., Influence of the instability of chip formation on the wear of a hard-alloy tool in cutting austenitic steel, Russ. Eng. Res., 2008, vol. 28, no. 9, pp. 904–905.
Nadai, A., Plasticity: A Mechanics of the Plastic State of Matter, New York: McGraw-Hill, 1931.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.A. Lipatov, Yu.L. Chigirinskii, S.I. Kormilitsin, 2013, published in STIN, 2013, No. 7, pp. 21–25.
About this article
Cite this article
Lipatov, A.A., Chigirinskii, Y.L. & Kormilitsin, S.I. Contact temperature and forces in the cutting of austenitic steel. Russ. Engin. Res. 34, 115–118 (2014). https://doi.org/10.3103/S1068798X14020105
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14020105